CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Community Contributions

[cfMesh] Edge problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 19, 2023, 12:51
Default Edge problem
  #1
New Member
 
Mohamed Diop
Join Date: Apr 2023
Posts: 3
Rep Power: 2
momod is on a distinguished road
Hi ! I'm a beginner on both cfmesh and snappyHexMesh. I started first on Snappy and quickly faced boundary layer deletion problems. Due to my complex geometry, I turned to cfmesh which is efficient for boundary layers addition but it destroys my trailing edge. Is there any suggestion to correct this problem ? Check the pictures attached to see the problem. I've tried to refine the mesh (31M cells ) but it didn't solve the problem.
geometry.png
geometry_post_cfmesh.png

Last edited by momod; May 22, 2023 at 05:11.
momod is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Autogrid Leading Edge/Trailing Edge Wizard intersection problem Fabisiko Fidelity CFD 2 November 14, 2022 05:28
[ANSYS Meshing] Problem with creating Infaltion (Only Edge Selection) Towe91 ANSYS Meshing & Geometry 1 March 13, 2017 08:52
[ICEM] Problem in Edge meshing Daniel_Khazaei ANSYS Meshing & Geometry 1 October 17, 2013 07:45
[ANSYS Meshing] blocking 2D planar, problem associate edge to curve hadrien51 ANSYS Meshing & Geometry 10 February 21, 2012 13:37
Through-Flow solver, Leading-Trailing edge problem Menander Main CFD Forum 0 May 14, 2008 19:14


All times are GMT -4. The time now is 06:16.