CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[blockMesh] is possible to do tetraedral or polyedral mesh using blockmesh??

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 15, 2010, 09:27
Default is possible to do tetraedral or polyedral mesh using blockmesh??
  #1
New Member
 
Join Date: Sep 2010
Posts: 5
Rep Power: 15
Ale_galleria is on a distinguished road
Hi,
I am Alessandro and I am a beginner in OpenFOAM...

is possible to do tetrahedral or polyedral mesh using blockmesh??

is possible to do a prism layer using blockmesh??

OpenFOAM blockmesh does only hexahedral mesh??


I try but without good results...

thanks for your help!!!
Ale_galleria is offline   Reply With Quote

Old   September 3, 2012, 07:30
Default
  #2
New Member
 
Vincenzo Santoro
Join Date: Apr 2012
Location: Politecnico di Torino
Posts: 16
Rep Power: 13
vinezio is on a distinguished road
hi alessandro,
there are 6 cell shape with openfoam. look this in chapter 5.1.3
http://www.openfoam.org/docs/user/me...23-1350005.1.3
each shape has own keyword to specify in blockMesh.
vincenzo
vinezio is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] 2D hybrid mesh (unstructured mesh highly dependent on structured mesh parameters) shubham jain ANSYS Meshing & Geometry 1 April 10, 2017 06:03
[Gmsh] gMsh instead of blockMesh for base mesh, then snappyHexMesh sazabi2001 OpenFOAM Meshing & Mesh Conversion 0 February 23, 2017 13:00
[snappyHexMesh] Snappyhex mesh: poor inlet mesh Swagga5aur OpenFOAM Meshing & Mesh Conversion 1 December 3, 2016 17:59
Star CCM Overset Mesh Error (Rotating Turbine) thezack Siemens 7 October 12, 2016 12:14
[blockMesh] blockMesh to generate the mesh of a deep cavity eddykendo OpenFOAM Meshing & Mesh Conversion 4 July 5, 2015 17:54


All times are GMT -4. The time now is 17:23.