CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Meshing & Mesh Conversion

Failed 1 mesh check

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 5, 2012, 08:19
Default Failed 1 mesh check
  #1
New Member
 
Join Date: Oct 2012
Posts: 3
Rep Power: 3
kont1901 is on a distinguished road
hello
I have a problem on conversion (ideasUnvToFoam) my mesh. When I make a checkMesh here it gives me the error:
/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 2.1.1 |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 2.1.1-221db2718bbb
Exec : checkMesh
Date : Nov 05 2012
Time : 07:43:32
Host : "charly-Precision-T3600"
PID : 4847
Case : /home/charly/OpenFOAM/charly-2.1.1/run/CTK_MRF/Exemple/Roue
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Disallowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create polyMesh for time = 0

Time = 0

Mesh stats
points: 725535
faces: 2061526
internal faces: 1949274
cells: 668800
boundary patches: 33
point zones: 0
face zones: 0
cell zones: 17

Overall number of cells of each type:
hexahedra: 666800
prisms: 2000
wedges: 0
pyramids: 0
tet wedges: 0
tetrahedra: 0
polyhedra: 0

Checking topology...
Boundary definition OK.
Cell to face addressing OK.
***Unused points found in the mesh, number unused by faces: 9 number unused by cells: 9
<<Writing 9 unused points to set unusedPoints
Upper triangular ordering OK.
Face vertices OK.
*Number of regions: 17
The mesh has multiple regions which are not connected by any face.
<<Writing region information to "0/cellToRegion"

Checking patch topology for multiply connected surfaces ...
Patch Faces Points Surface topology
Int_F13-F14 250 306 ok (non-closed singly connected)
Int_F14-F13 250 306 ok (non-closed singly connected)
Int_F14-E2 1000 1071 ok (non-closed singly connected)
InterfaceF1-F2 2100 2295 ok (non-closed singly connected)
Int_E2-F14 1000 1071 ok (non-closed singly connected)
Int_E2-A2 1000 1071 ok (non-closed singly connected)
Pale 10250 10812 ok (non-closed singly connected)
Periodic_re1 10000 10404 ok (non-closed singly connected)
Periodic_re2 10000 10404 ok (non-closed singly connected)
Interface_re 8000 8324 ok (non-closed singly connected)
Epaul 5376 5902 ok (non-closed singly connected)
Fond 13376 14226 ok (non-closed singly connected)
Interface_rs 2100 2193 ok (non-closed singly connected)
Periodic_rs2 6650 7089 ok (non-closed singly connected)
Periodic_rs1 6650 7089 ok (non-closed singly connected)
Inter_A1-A2 2000 2091 ok (non-closed singly connected)
InterfaceA2-A1 2150 2295 ok (non-closed singly connected)
Int_A22-A21 500 561 ok (non-closed singly connected)
Int_A22-A23 500 561 ok (non-closed singly connected)
Inter_A21-A22 500 561 ok (non-closed singly connected)
Inter_A23-A22 500 561 ok (non-closed singly connected)
Int_A23-E1 1000 1071 ok (non-closed singly connected)
Int_E1-A23 1000 1071 ok (non-closed singly connected)
Int_A21-I1 1000 1071 ok (non-closed singly connected)
Int_I1-A21 1000 1071 ok (non-closed singly connected)
Int_I2-I1 1000 1071 ok (non-closed singly connected)
Int_I1-I2 1000 1071 ok (non-closed singly connected)
Int_I2-F11 1000 1071 ok (non-closed singly connected)
Int_F11-I2 1000 1071 ok (non-closed singly connected)
Int_F12-F11 250 306 ok (non-closed singly connected)
Int_F12-F13 250 306 ok (non-closed singly connected)
Int_f13-F12 250 306 ok (non-closed singly connected)
defaultFaces 19350 20298 ok (non-closed singly connected)

Checking geometry...
Overall domain bounding box (3.32075e-24 -1.38778e-17 -0.0700636) (0.0741393 0.0397589 0.00472739)
Mesh (non-empty, non-wedge) directions (1 1 1)
Mesh (non-empty) directions (1 1 1)
Boundary openness (-1.08825e-15 -1.93319e-18 3.17206e-15) OK.
Max cell openness = 3.3561e-15 OK.
Max aspect ratio = 349.505 OK.
Minumum face area = 4.31778e-10. Maximum face area = 4.09037e-07. Face area magnitudes OK.
Min volume = 1.83206e-13. Max volume = 1.44356e-10. Total volume = 2.60163e-05. Cell volumes OK.
Mesh non-orthogonality Max: 81.8476 average: 30.4385
*Number of severely non-orthogonal faces: 41315.
Non-orthogonality check OK.
<<Writing 41315 non-orthogonal faces to set nonOrthoFaces
Face pyramids OK.
Max skewness = 3.50209 OK.
Coupled point location match (average 0) OK.

Failed 1 mesh checks.

End



please help me
kont1901 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mesh check failed / degenerated contact points shohin FLUENT 16 April 11, 2014 22:32
Add Mesh Layers doesnt work on the whole surface Kryo OpenFOAM Native Meshers: snappyHexMesh and Others 8 September 13, 2012 09:28
Layers:problem with curvature giulio.topazio OpenFOAM Native Meshers: snappyHexMesh and Others 10 August 22, 2012 09:03
[ICEM] Understanding check mesh output kotimari ANSYS Meshing & Geometry 0 July 15, 2012 08:33
Transient boundary conditions Jarrod Sinclair (Sinclair) OpenFOAM Running, Solving & CFD 132 November 30, 2011 11:06


All times are GMT -4. The time now is 07:27.