CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Meshing & Mesh Conversion

3D mesh as extrusion

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 9, 2013, 08:32
Default 3D mesh as extrusion
  #1
Member
 
Simone
Join Date: Sep 2012
Posts: 95
Rep Power: 4
batta31 is on a distinguished road
Hi guys, I need your help. I've performed a 2D simulation over a naca0012 arfoil, and now I would like to do a 3D simulation by simply extruding the airfoil. It is enough to put a greater number of points in the third direction and set as "patch" the front and back patches who were set as empty?

And, by the way, which boundary condition do you suggest to use in these "new" patches? I as thought to put "symmetryPlane", is it a correct choice?

Thanks a lot
Simone

Last edited by batta31; January 9, 2013 at 10:39.
batta31 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Negative volume error in hybrid mesh siw ANSYS Meshing & Geometry 4 September 3, 2014 05:25
3D Hybrid Mesh Errors DarrenC ANSYS Meshing & Geometry 11 August 5, 2013 06:42
No layers in a small gap bobburnquist OpenFOAM Native Meshers: snappyHexMesh and Others 2 November 25, 2012 09:54
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10


All times are GMT -4. The time now is 12:13.