CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (http://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   Mesh importation from Salome-Meca problem (http://www.cfd-online.com/Forums/openfoam-meshing/113164-mesh-importation-salome-meca-problem.html)

maxj February 13, 2013 18:14

Mesh importation from Salome-Meca problem
 
Hello,

I'm currently doing a final-year project for my dissertation, and have spent a considerable amount of time trying to independently learn openFOAM, Salome, and even 'linux' for that matter.

After completing my mesh generation, I tried to use the ideasUnvToFoam function, and could not solve the following error:

Processing tag:2411
Starting reading points at line 3.
Read 100964 points.

Processing tag:2412
Starting reading cells at line 201934.
First occurrence of element type 11 for cell 1 at line 201935
First occurrence of element type 41 for cell 1531 at line 206525
First occurrence of element type 111 for cell 134541 at line 472545
Read 299092 cells and 133010 boundary faces.

Processing tag:2467
Starting reading patches at line 1070731.
For group 1 named Walls trying to read 132152 patch face indices.
For group 2 named MPIn trying to read 385 patch face indices.
For group 3 named MPOut trying to read 385 patch face indices.
For group 4 named ECOIn trying to read 88 patch face indices.

ideasUnvToFoam: ideasUnvToFoam.C:881: int main(int, char**): Assertion `nrFaceCells[faceI] == 1 || nrFaceCells[faceI] == 2' failed.
Aborted

Any help would be immensely appreciated, thank you very much for reading.

Adam


All times are GMT -4. The time now is 22:57.