CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (http://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   issue 1_running several mesh configurations for a cavity model (tutorial) (http://www.cfd-online.com/Forums/openfoam-meshing/114806-issue-1_running-several-mesh-configurations-cavity-model-tutorial.html)

Luis Batista March 18, 2013 07:17

issue 1_running several mesh configurations for a cavity model (tutorial)
 
Dear OpenFoam Users,

this is my debut in this Forum along.

I have run some however, I am interessed in doing some variations in statial step size of structured mesh ans study how does that compare with a spectral methodology.

I would like to run several mesh cases and collect results for specific points in the simulation. Afterwards, I would process then for error estimation.

I request help to explain me how could this be done and it is something that a very recent user of OpenFoam could aim to. If not, I would run the blockmesh manually and collect the data in a primitive fashion.

note:
I am a complete beginner in OpenFoam.

wyldckat March 24, 2013 14:51

Greetings Luis and welcome to the forum!

I'll have to be quick to answer - Google this:
Quote:

openfoam probes
Good luck! Best regards,
Bruno

Luis Batista March 24, 2013 19:24

Thanks!

I have solved this issue manually but this function is indeed useful.

regards,
Luis


All times are GMT -4. The time now is 10:18.