CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (http://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   Import mesh with internal face from Fluent to openfoam 2.1.1 (http://www.cfd-online.com/Forums/openfoam-meshing/116835-import-mesh-internal-face-fluent-openfoam-2-1-1-a.html)

neeraj April 26, 2013 03:46

Import mesh with internal face from Fluent to openfoam 2.1.1
 
Hi all,
I have a closed loop flow problem. I want to model a pressure drop(to simulate forced convection) across a internal face using "fan" boundary condition in openfoam 2.1.1. I am using Gambit to generate mesh and then "FluentMeshToFoam" command to import it to OF. The steps given in openfoamwiki is not working with OF 2.1.1. How to import a mesh with internal face in OF 2.1.1?

nimasam April 29, 2013 04:54

its fluentMeshToFoam not FluentMeshToFoam (F is not capital :P)
however, your case is 2D or 3D? if it is 3D cases, you should use fluent3DMeshToFoam :)
if there is an error, you should post your error here, then any one would help you


All times are GMT -4. The time now is 18:54.