CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Meshing & Mesh Conversion

problem with cyclic BCs

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 4, 2013, 04:59
Default problem with cyclic BCs
  #1
New Member
 
LI Bo
Join Date: Apr 2013
Posts: 13
Rep Power: 4
michel1988 is on a distinguished road
Hello everyone,
I create a multi-block mesh in Pointwise and I want to convert it to an OpenFOAM mesh. When Pointwise exports directly the mesh to OpenFOAM, the boundries with cyclic BCs do not match because of inconsistent ordering.
I may convert the mesh in another way: export the mesh to another format and employ the mesh conversion utilities in OpenFOAM (for example, to a FLUENT mesh and then use fluentMeshToFoam). Anyone can tell me if it works? The mesh I create is so large that a single conversion with XXXXToFoam costs too much time. I can not afford to try one by one.
Thanks.
michel1988 is offline   Reply With Quote

Reply

Tags
cyclic bcs, pointwise

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with cyclic boundaries in Openfoam 1.5 fs82 OpenFOAM 37 January 7, 2015 01:31
parallel error with cyclic BCs for pimpleDyMFoam and trouble in resuming running sunliming OpenFOAM Bugs 21 November 22, 2013 04:38
problem when I import mesh with cyclic graduated BC Cyp OpenFOAM 0 March 3, 2011 11:38
Possible problem in cyclic boundary conditions in parallel cases alberto OpenFOAM Bugs 3 June 10, 2009 11:22
problem in setting up BC's san FLUENT 0 April 26, 2006 01:34


All times are GMT -4. The time now is 06:36.