CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   [Commercial meshers] Error on mesh conversion from Fluent to openFoam (https://www.cfd-online.com/Forums/openfoam-meshing/126218-error-mesh-conversion-fluent-openfoam.html)

sam.ho November 11, 2013 05:50
Error on mesh conversion from Fluent to openFoam
 
1 Attachment(s)
Hi Foamers:)
I am a beginner in OpenFOAM . I took a 3d fluent mesh and converted to OpenFOAM by using fluent3DMeshToFoam command.
I have attached the snapshot of error .
Kindly look in to the problem and help me to resolve this .

Thangam December 11, 2013 03:50
try this:

http://www.cfd-online.com/Forums/ope...rted-mesh.html

rsingh7 February 14, 2014 18:58
Hi Sam,

I have problem in importing fluent mesh file to Openfoam. Can you send the mesh file that you have successfully exported in OpenFoam. I will look your mesh file and will change my mesh file accordingly.

Regards

sam.ho February 17, 2014 22:41
Hi Rajesh Singh,

The mesh file is very huge and its confidential too. Let me know what would be your error so that i can address ?

Regards,
Sam

rsingh7 February 20, 2014 17:18
Hi Sam,

Thanks for your response. Could you please go through the link where I have posted my problem.

http://www.cfd-online.com/Forums/ope...-openfoam.html


Regards

sam.ho February 20, 2014 22:47
Hi Rajesh Singh,

Could you please send the error snapshot ?
So that we can help .

rsingh7 February 21, 2014 00:12
HI Sam,

Eroor is:

Segmentation fault

It does not any thing extra.

Regards


All times are GMT -4. The time now is 02:51.