CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Meshing & Mesh Conversion

Simultaneous fine and course Meshes for two parts of a solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 22, 2013, 15:01
Default Simultaneous fine and course Meshes for two parts of a solver
  #1
New Member
 
Masoud Ami
Join Date: Sep 2013
Posts: 15
Rep Power: 3
MasAmi is on a distinguished road
Hello All.
I have built a solver which solves turbulent mixed convection flow and Radiation heat transfer in a vertical parallel plates channel.
Does anyone know that how we can set different meshes for these two parts? I mean because radiation doesn't need a very fine mesh, can we set a course mesh for solving RTE and at the same time a fine mesh for flow part?
As you may know, after each iteration in RTE solution, result goes to energy equation via source term. Then the flow equations are solved for one iteration and this procedure goes on.
Best Regards,
Mas
MasAmi is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 13:52.