CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Meshing & Mesh Conversion

Fluent to OpenFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 30, 2014, 19:13
Default Fluent to OpenFoam
  #1
New Member
 
Rajesh Singh
Join Date: Jun 2010
Posts: 9
Rep Power: 6
rsingh7 is on a distinguished road
Hi,

I was converting to fluent mesh (*.msh) to OpenFOAM as follows

fluent3DMeshToFoam *.msh

Segmentation fault

and Segmentation fault error come out.

I am newb in OpenFoam and don't have any idea of this error. Any help for this will be highly appreciated.

Reagrds
rsingh7 is offline   Reply With Quote

Old   February 5, 2014, 08:24
Default
  #2
Senior Member
 
Nima Sam
Join Date: Sep 2009
Location: Tehran, Iran
Posts: 1,066
Blog Entries: 1
Rep Power: 14
nimasam is on a distinguished road
Send a message via Yahoo to nimasam
you should atleast post your error line here
__________________
Training Course on OpenFOAM at (http://www.isme.ir/)
My Weblog (http://openfoam.blogfa.com/)
nimasam is offline   Reply With Quote

Old   February 6, 2014, 14:03
Default
  #3
Senior Member
 
ArathoN
Join Date: Jul 2011
Posts: 117
Rep Power: 5
ArathoN is on a distinguished road
did you set up the BC on fluent?because i had a similar error when i forgot to do it.
ArathoN is offline   Reply With Quote

Old   February 8, 2014, 05:35
Default
  #4
New Member
 
Rajesh Singh
Join Date: Jun 2010
Posts: 9
Rep Power: 6
rsingh7 is on a distinguished road
Yes, I did specify the BC and fluent as solver.
rsingh7 is offline   Reply With Quote

Reply

Tags
openfoam 2.1.0

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
problem in using parallel process in fluent 14 aydinkabir88 FLUENT 1 July 10, 2013 02:00
FLUENT or OpenFoam for Particle-surface intercation simulation? Amir1 Main CFD Forum 0 May 10, 2013 17:15
OpenFoam to Fluent data conversion Problem vemps OpenFOAM 1 August 8, 2011 02:30
[Other] OpenFoam Mesh to Fluent Mesh, 2D lordvon ANSYS Meshing & Geometry 0 November 8, 2010 13:48
Conversion Fluent cas and dat file to OpenFoam matteo_gautero OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 9 April 3, 2008 02:32


All times are GMT -4. The time now is 23:48.