CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Meshing & Mesh Conversion

Creating Mesh for double body

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 17, 2014, 17:16
Default Creating Mesh for double body
  #1
New Member
 
Tobias W.
Join Date: Feb 2014
Posts: 1
Rep Power: 0
tw002 is on a distinguished road
Hello, I'm new at OF and I'm trying to create a mesh for double body flow. The problem is I've got a stl-file with two solids. Once the solid for the submerged part of the ship and on the other hand the solid for the area above the waterline. For double body flow I only need the submerged solid, Creating a symmetry plane at waterline area to avoid influence of the free surface. Is it possible to create a block mesh that only depends on the draught?

Happy if you could help me.
tw002 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
No layers in a small gap bobburnquist OpenFOAM Native Meshers: snappyHexMesh and Others 6 August 26, 2015 09:38
Star CCM Overset Mesh Error (Rotating Turbine) thezack CD-adapco 3 December 11, 2013 04:09
Difficulty in calculating angular velocity of Savonius turbine simulation alfaruk CFX 8 December 3, 2013 17:51
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation tommymoose ANSYS Meshing & Geometry 48 April 15, 2013 04:24
How to set boundary layer of a moving body in GAMBIT to a mesh zone for dynamic mesh tomyangbath FLUENT 16 January 18, 2012 05:47


All times are GMT -4. The time now is 13:54.