CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Meshing & Mesh Conversion

Problem with mesh conversion - how to set the physical properties

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 4, 2015, 04:41
Default Problem with mesh conversion - how to set the physical properties
  #1
New Member
 
wangtianjian
Join Date: Dec 2014
Location: Beijing, China
Posts: 13
Rep Power: 3
wtjhaha is on a distinguished road
Recently I mesh a tube using Gambit, and I use fluentMeshToFoam to transfer it into OpenFOAM mesh. But I set fluid area and solid area, how can I set the physical properties of the areas? And are there any examples to teach me which file is needed in the case?
Thank you!
wtjhaha is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
engineFoam new mesh problem ayhan515 OpenFOAM Meshing & Mesh Conversion 5 August 10, 2015 08:45
determining displacement for added points CFDnewbie147 OpenFOAM Native Meshers: snappyHexMesh and Others 1 October 22, 2013 09:53
2D Mesh Generation Tutorial for GMSH aeroslacker Open Source Meshers: Gmsh, Netgen, CGNS, ... 12 January 19, 2012 04:52
[ICEM] Problem making structured mesh on a surface froztbear ANSYS Meshing & Geometry 4 November 10, 2011 09:52
[ICEM] Problem making structural mesh on a surface froztbear ANSYS Meshing & Geometry 1 November 10, 2011 09:52


All times are GMT -4. The time now is 18:27.