Grid quatlity for particle tracking
1 Attachment(s)
Hi,
I have to perform a particle tracking in a blood micro vessel network. I have an stl file for the geometry and I build the grid with snappyHexmesh. My grid is OK for the flow but not for the particles : --> FOAM FATAL ERROR: No base point for face 1854708, 4(894291 917963 919857 916949), produces a decomposition that has a minimum volume greater than tolerance. I tried many unsuccessful combination in snappyHexMeshDict which I join here. Can someone tell me which parameters I have to modify to generate a nice grid? Thanks Yannick |
Quote:
Do you know how to change the tolerance mentioned in the error? |
Hi
No i was not able to fix this issue, I tried many grid generation but so faar nothing is working! |
Quote:
I guess SHM has some problems and produces low quality tet meshes. |
YEP if you have ICEM then te-meshes are OK.
Hexa grid is much more complicated. |
Hello,
regarding this topic I recommend you to read the following thread: http://www.cfd-online.com/Forums/ope...mposition.html Kind regards Chrisi |
Hi
Thanks Chrisi, this post gives idea on why the grid is not OK but unfortunately not how to fix the problem. |
All times are GMT -4. The time now is 16:51. |