[Technical] Filling tha GAP between two meshes -- CFD Online Discussion Forums

December 14, 2015, 09:52	Filling tha GAP between two meshes	#1
GregSpy New Member Join Date: Dec 2015 Posts: 1 Rep Power: 0	Hello everyone, I'm facing a problem: 1) I created a 3D mesh with snappy tool. 2) I made it a 'fake' 2D mesh (aka 1 cell along z direction) 3) Now I made a mirror of this last mesh Now my problem arises: since there is a empty space between this two block (original and mirror), is there any tool in openFoam which can fill this gap? http://postimg.org/image/iewzifqq7/ Now the faces adjacent to the gap have same mesh seeding. My question is how do I fill this gap by extruding these faces creating 'n' layers in between (aka meshing the gap)?

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mapping (interpolation) between two meshes	Ebrahim	OpenFOAM Programming & Development	2	June 15, 2020 13:31
Flow in gap / Couette Flow with Overset Mesh	Yan77	STAR-CCM+	0	March 12, 2018 15:32
How can I put the data of adpated meshes on the original unadapted meshes?	xh110120	FLUENT	2	March 11, 2016 02:00
Hex and Tet meshes - simplefoam comparison	danvica	OpenFOAM Running, Solving & CFD	10	January 4, 2013 01:18
[snappyHexMesh] Meshing a small gap between walls	staustrahltriebwerk	OpenFOAM Meshing & Mesh Conversion	1	July 23, 2012 11:46

All times are GMT -4. The time now is 21:33.