CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (http://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   hexa vs hybrid mesh convergence (http://www.cfd-online.com/Forums/openfoam-meshing/75383-hexa-vs-hybrid-mesh-convergence.html)

Viais April 23, 2010 10:39

hexa vs hybrid mesh convergence
 
Hello everyone,
I ran two simple cases (flow in rectangular tube with rhoPimpleFoam, like angledDuct tutorial). The first case with a hex mesh and other case with hybrid mesh (tetra + prism).
I obtained a fast convergence with the first case, but with the hybrid mesh i did not obtained success yet.
I would like to know what the best practices for setup tetra-prism mesh case or still, if there is any tutorial for these cases (hybrid mesh).
Thank you for your help,
Aluisio Viais Pantalećo


All times are GMT -4. The time now is 16:56.