CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (http://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   Hypermesh, connecting surfaces (http://www.cfd-online.com/Forums/openfoam-meshing/81774-hypermesh-connecting-surfaces.html)

Schuschi November 6, 2010 05:55

Hypermesh, connecting surfaces
 
Hi,

I've been working with Hypermesh for 1 week and need some help. I've got some problems with connecting the created meshes for the calculation. I have drawn and meshed the parts I needed and put the boundary conditions and forces on different elements. When I simulated the results in hyperview the part with the force is gone and the other parts have no displacement so I think they arent connected. The meched surfaces don't touch each other but the thickness of the meched surfaces should exactely touch.
Which commands do I have to use for connecting the parts.

Many thanks.

vnpenguin November 7, 2010 04:27

Are you talking about OpenFOAM computation with mesh made by Hypermesh?


All times are GMT -4. The time now is 00:41.