CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Commercial meshers] different results for meshes produced by gambit and ICEM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 23, 2012, 04:11
Default different results for meshes produced by gambit and ICEM
  #1
Member
 
zakir
Join Date: Nov 2011
Posts: 44
Rep Power: 14
zakir hussain is on a distinguished road
hi everyone
For a simple pipe flow,which size is 0.5X4,I used gambit and ICEM to produce .msh files.After converting the .msh files with command fluentMeshToFoam or fluent3DMeshToFoam,I ran the command icoFoam.What interested me is the big differences between the two case.And I found that the result with the mesh produced by gambit was correct,the other was wrong.
So who can tell me what is wrong with it?

Regards!

zakir
zakir hussain is offline   Reply With Quote

Old   April 23, 2012, 09:15
Default
  #2
Senior Member
 
akidess's Avatar
 
Anton Kidess
Join Date: May 2009
Location: Germany
Posts: 1,377
Rep Power: 29
akidess will become famous soon enough
Please read: http://www.cfd-online.com/Forums/ope...-get-help.html
__________________
*On twitter @akidTwit
*Spend as much time formulating your questions as you expect people to spend on their answer.
akidess is offline   Reply With Quote

Reply

Tags
gambit and icem

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Switching to ICEM from GAMBIT miro2000 ANSYS Meshing & Geometry 3 December 5, 2014 05:32
[ICEM] Different meshes from ICEM and GAMBIT Mojtaba.a ANSYS Meshing & Geometry 9 March 30, 2013 03:42
[ICEM] ICEM sizing function >>> Gambit and Ansys meshing Far ANSYS Meshing & Geometry 0 March 3, 2013 11:17
[ICEM] Gambit to ICEM, any advices ? Santos-Dumont ANSYS Meshing & Geometry 15 February 28, 2012 20:07
[ICEM] Gambit to Openfoam, Gambit to ICEM to Openfoam Rickard.Solsjo ANSYS Meshing & Geometry 7 November 30, 2011 11:20


All times are GMT -4. The time now is 16:58.