CFD Online Discussion Forums

CFD Online Discussion Forums (
-   OpenFOAM Meshing & Mesh Conversion (
-   -   gmsh -> OpenFOAM = noise? (

hsingtzu November 29, 2011 16:41

gmsh -> OpenFOAM = noise?
1 Attachment(s)

I made a mesh with gmsh and imported it to OpenFOAM using gmshToFoam. It worked, but there seemed some noise around the model in OpenFOAM. I attached the model, and you can clearly see there was some noise inside of the cylinder hole where I set boundary conditions. I was wondering if anyone encountered the issue and knew how to resolve it.


All times are GMT -4. The time now is 18:25.