CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Meshing & Mesh Conversion

the problem in snapphexmesh axissymmetric geometric

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 28, 2012, 03:04
Default the problem in snapphexmesh axissymmetric geometric
New Member
Join Date: Sep 2010
Posts: 27
Rep Power: 7
nygbook is on a distinguished road
I use snappyHexMesh to refine a axisymmetric geometric. however, the snappy cannot work. the error is below
cell 0 of level 0 does not seem to have 8 points of equal or lower level
cellPoints:6(0 1 7701 7702 151 152)

    From function hexRef8::setRefinement(const labelList&, polyTopoChange&)
    in file polyTopoChange/polyTopoChange/hexRef8.C at line 3527.

FOAM aborting
I think the cell in axis patch have only six point. as a result, the snappyHexMesh can refine the cell. Anybody can me some suggestion for this problem?
nygbook is offline   Reply With Quote

Old   March 8, 2012, 01:16
Default same problem
New Member
Join Date: Feb 2012
Posts: 16
Rep Power: 5
CFD_user_2012 is on a distinguished road

I have same problem also, any solutions yet ?

CFD_user_2012 is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
engineFoam new mesh problem ayhan515 OpenFOAM Meshing & Mesh Conversion 5 August 10, 2015 08:45
UDF compiling problem Wouter Fluent UDF and Scheme Programming 6 June 6, 2012 04:43
Gambit - meshing over airfoil wrapping (?) problem JFDC FLUENT 1 July 11, 2011 05:59
natural convection problem for a CHT problem Se-Hee CFX 2 June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 19:13

All times are GMT -4. The time now is 01:02.