[snappyHexMesh] the problem in snapphexmesh axissymmetric geometric

nygbook · February 28, 2012, 02:04

I use snappyHexMesh to refine a axisymmetric geometric. however, the snappy cannot work. the error is below

Code:

--> FOAM FATAL ERROR: 
cell 0 of level 0 does not seem to have 8 points of equal or lower level
cellPoints:6(0 1 7701 7702 151 152)
pointLevels:6{0}


    From function hexRef8::setRefinement(const labelList&, polyTopoChange&)
    in file polyTopoChange/polyTopoChange/hexRef8.C at line 3527.

FOAM aborting

I think the cell in axis patch have only six point. as a result, the snappyHexMesh can refine the cell. Anybody can me some suggestion for this problem?

CFD_user_2012 · March 8, 2012, 00:16

Hi

I have same problem also, any solutions yet ?

CFD_user

February 28, 2012, 02:04	the problem in snapphexmesh axissymmetric geometric	#1
nygbook New Member NieYongguang Join Date: Sep 2010 Posts: 27 Rep Power: 15	I use snappyHexMesh to refine a axisymmetric geometric. however, the snappy cannot work. the error is below Code: --> FOAM FATAL ERROR: cell 0 of level 0 does not seem to have 8 points of equal or lower level cellPoints:6(0 1 7701 7702 151 152) pointLevels:6{0} From function hexRef8::setRefinement(const labelList&, polyTopoChange&) in file polyTopoChange/polyTopoChange/hexRef8.C at line 3527. FOAM aborting I think the cell in axis patch have only six point. as a result, the snappyHexMesh can refine the cell. Anybody can me some suggestion for this problem?

March 8, 2012, 00:16	same problem	#2
CFD_user_2012 New Member Anone Join Date: Feb 2012 Posts: 16 Rep Power: 14	Hi I have same problem also, any solutions yet ? CFD_user

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BuoyantBoussinesqSimpleFoam_Facing problem	Mondal131211	OpenFOAM Running, Solving & CFD	1	April 10, 2019 19:41
Gambit - meshing over airfoil wrapping (?) problem	JFDC	FLUENT	1	July 11, 2011 05:59
natural convection problem for a CHT problem	Se-Hee	CFX	2	June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13
How to update polyPatchbs localPoints	liu	OpenFOAM Running, Solving & CFD	6	December 30, 2005 17:27