|
[Sponsors] |
[snappyHexMesh] the problem in snapphexmesh axissymmetric geometric |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 28, 2012, 02:04 |
the problem in snapphexmesh axissymmetric geometric
|
#1 |
New Member
NieYongguang
Join Date: Sep 2010
Posts: 27
Rep Power: 15 |
I use snappyHexMesh to refine a axisymmetric geometric. however, the snappy cannot work. the error is below
Code:
--> FOAM FATAL ERROR: cell 0 of level 0 does not seem to have 8 points of equal or lower level cellPoints:6(0 1 7701 7702 151 152) pointLevels:6{0} From function hexRef8::setRefinement(const labelList&, polyTopoChange&) in file polyTopoChange/polyTopoChange/hexRef8.C at line 3527. FOAM aborting |
|
March 8, 2012, 00:16 |
same problem
|
#2 |
New Member
Anone
Join Date: Feb 2012
Posts: 16
Rep Power: 14 |
Hi
I have same problem also, any solutions yet ? CFD_user |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
BuoyantBoussinesqSimpleFoam_Facing problem | Mondal131211 | OpenFOAM Running, Solving & CFD | 1 | April 10, 2019 19:41 |
Gambit - meshing over airfoil wrapping (?) problem | JFDC | FLUENT | 1 | July 11, 2011 05:59 |
natural convection problem for a CHT problem | Se-Hee | CFX | 2 | June 10, 2007 06:29 |
Adiabatic and Rotating wall (Convection problem) | ParodDav | CFX | 5 | April 29, 2007 19:13 |
How to update polyPatchbs localPoints | liu | OpenFOAM Running, Solving & CFD | 6 | December 30, 2005 17:27 |