OpenFOAM Events October 2012

opencfd · September 24, 2012, 21:55

OpenFOAM will be showcased at two events hosted in the US by ESI during October 2012.

16 Oct 2012: OpenFOAM Seminar - Southfield (Detroit), MI Complimentary OpenFOAM seminar day with our team of experts sharing knowledge and experience of OpenFOAM. Please see the agenda for further details.

18/19 Oct 2012: ESI Global Forum - San Diego, CA A full CFD/OpenFOAM session will take place on the 2nd day of the Forum. Please see the agenda for further details.

http://www.openfoam.com/news/events-oct-2012.php
http://www.esi-group.com/contact/ESI...rum2012/agenda
http://www.esi-group.com/corporate/e...enfoam-seminar

vatavuk · September 25, 2012, 06:52

Hi,
On the agenda of the OpenFOAM seminar the activity at 1 p.m. is described as:

Pre & Post for OpenFOAM® (live-demo of OpenFOAM® GUI)

So I would like to ask: Is this GUI already available for download?
Thanks,
Paulo

elvis · September 25, 2012, 07:41

Hi Paulo,

I think they present their commercial Gui called "OpenSIM", they announced that
at OpenFOAM workshop in Darmstadt.

So far I believe it has not been shown to public.

There is also another Gui-tool by competitor "Engys" called Helyx-OS the Opensource version which can you download free of charge, it comes without a manual but it is not that complicated to use in my eyes.

An overview of Gui´s is made @OpenFOAM wiki

wyldckat · September 25, 2012, 08:54

Greetings to all!

I'm assuming the name "OpenSIM" was an internal name... because there's at least another one already with the same name: https://simtk.org/home/opensim

Best regards,
Bruno

vatavuk · September 25, 2012, 11:45

Hi Elvis,
Thanks for the information.

m9819348 · September 28, 2012, 03:12

Ladies,
Gentlemen,

thank you for your interest in OpenFOAM® offerings.

@Elvis: thanks for mentioning ESI's environment for OpenFOAM. It will be in all of your hands soon!

@Wyldckat: you are a clever person! Indeed, the name OpenSIM was chosen before we knew about the merging of ESI and OpenCFD. Once we figure out a better name, you will hear more from it.

If you have any suggestions, I am all ears! If you would like to learn more about ESI and OpenCFD, please send me an email. We can arrange for a webinar.

Keep foaming!

Ries

OpenFOAM® is a registered trademark of ESI

elvis · September 28, 2012, 03:28

Quote:

Originally Posted by m9819348

If you have any suggestions, I am all ears! If you would like to learn more about ESI and OpenCFD, please send me an email. We can arrange for a webinar.

Keep foaming!

Ries

OpenFOAM® is a registered trademark of ESI

"SexyHexyMeshwizard" but I guess ESI is a serious company

September 24, 2012, 21:55	OpenFOAM Events October 2012	#1
opencfd Member OpenCFD Join Date: Mar 2009 Posts: 67 Rep Power: 19	OpenFOAM will be showcased at two events hosted in the US by ESI during October 2012. 16 Oct 2012: OpenFOAM Seminar - Southfield (Detroit), MI Complimentary OpenFOAM seminar day with our team of experts sharing knowledge and experience of OpenFOAM. Please see the agenda for further details. 18/19 Oct 2012: ESI Global Forum - San Diego, CA A full CFD/OpenFOAM session will take place on the 2nd day of the Forum. Please see the agenda for further details. http://www.openfoam.com/news/events-oct-2012.php http://www.esi-group.com/contact/ESI...rum2012/agenda http://www.esi-group.com/corporate/e...enfoam-seminar

September 25, 2012, 07:41		#3
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	Hi Paulo, I think they present their commercial Gui called "OpenSIM", they announced that at OpenFOAM workshop in Darmstadt. So far I believe it has not been shown to public. There is also another Gui-tool by competitor "Engys" called Helyx-OS the Opensource version which can you download free of charge, it comes without a manual but it is not that complicated to use in my eyes. An overview of Gui´s is made @OpenFOAM wiki m9819348 likes this.

September 25, 2012, 08:54		#4
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings to all! I'm assuming the name "OpenSIM" was an internal name... because there's at least another one already with the same name: https://simtk.org/home/opensim Best regards, Bruno m9819348 likes this. __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

September 28, 2012, 03:12		#6
m9819348 New Member Ries Bouwman Join Date: Mar 2009 Location: Graz, Austria Posts: 28 Rep Power: 17	Ladies, Gentlemen, thank you for your interest in OpenFOAM® offerings. @Elvis: thanks for mentioning ESI's environment for OpenFOAM. It will be in all of your hands soon! @Wyldckat: you are a clever person! Indeed, the name OpenSIM was chosen before we knew about the merging of ESI and OpenCFD. Once we figure out a better name, you will hear more from it. If you have any suggestions, I am all ears! If you would like to learn more about ESI and OpenCFD, please send me an email. We can arrange for a webinar. Keep foaming! Ries OpenFOAM® is a registered trademark of ESI __________________ Dr. Ries Bouwman Business Development ESI Group 004369917171525 @riesbouwman

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Superlinear speedup in OpenFOAM 13	msrinath80	OpenFOAM Running, Solving & CFD	18	March 3, 2015 05:36
OpenFOAM Training Courses in Germany	hjasak	OpenFOAM Announcements from Other Sources	0	July 23, 2009 19:34
OpenFOAM Training in Europe and USA	hjasak	OpenFOAM	0	August 8, 2008 05:33
OpenFOAM two days long training in Gothenburg Sweden 8th and 9th of October	simdi	OpenFOAM	0	July 13, 2008 14:02
Cumulative patch for OpenFOAM 141 October 25th 2007	jfb	OpenFOAM Bugs	5	October 30, 2007 16:29

September 25, 2012, 06:52		#2
vatavuk Senior Member Paulo Vatavuk Join Date: Mar 2009 Location: Campinas, Brasil Posts: 196 Rep Power: 17	Hi, On the agenda of the OpenFOAM seminar the activity at 1 p.m. is described as: Pre & Post for OpenFOAM® (live-demo of OpenFOAM® GUI) So I would like to ask: Is this GUI already available for download? Thanks, Paulo

September 25, 2012, 11:45		#5
vatavuk Senior Member Paulo Vatavuk Join Date: Mar 2009 Location: Campinas, Brasil Posts: 196 Rep Power: 17	Hi Elvis, Thanks for the information.