CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Announcements from Other Sources (http://www.cfd-online.com/Forums/openfoam-news-announcements-other/)
-   -   OpenFOAM Training Dates by Wikki (http://www.cfd-online.com/Forums/openfoam-news-announcements-other/77870-openfoam-training-dates-wikki.html)

hjasak July 6, 2010 12:22

OpenFOAM Training Dates by Wikki
 
Gridcore AB and Wikki announce the following OpenFOAM Trainings:

Intoductory training in Stuttgart on 20 and 21 October 2010

Advanced training in Stuttgart on 20 and 21 October 2010

Introductory training in Gothenburg on 26 and 27 October 2010

Advanced training in Gothenburg on 26 and 27 October 2010

The trainings are organised in collaboration with IBM.

The courses will be delivered by Prof. Hrvoje Jasak and Dr. Henrik Rusche. Material covered will include use of OpenFOAM as a CFD solver, Overview of OpenFOAM library, and OpenFOAM in Use.

For more details and registration, see the Course leaflet or visit Wikki and Gompute web sites.

https://www.gompute.com/web/guest/trainings
https://www.wikki.co.uk
https://www.gompute.se

maddalena January 18, 2011 10:05

Are there any course planned for 2011?
Thanks

maddalena

mirko January 20, 2011 10:49

Also check out the OF's training schedule. I attended their courses (foundations & advanced). They were quite good.

Mirko

hjasak January 20, 2011 15:12

Hello Maddalena,

Yes, there is a set of courses planned, and I am awaiting a final confirmation from our friends at Gompute. I have asked Iago to contact you directly, hopefully this will happen soon (tomorrow?). We will announce it here.

Please drop me a line if you don't hear anything by mid of next week.

I look forward to meeting you again at the training,

Hrvoje

Gompute-Iago January 21, 2011 08:08

OpenFOAM courses 2011
 
Dear Maddalena,

The dates and places planned are the next:

3th and 4th of March 2011
Chicago (USA)


16th and 17th of March 2011
Cologne (Germany)


4th and 5th of May 2011
Gothenburg (Sweden)


Please feel free to contact me at iago@se.gompute.com for further information. The official information will be published soon.


Regards

maddalena February 2, 2011 06:49

Hi hrv, hi Iago.
I saw on Gompute website that introductory courses are the only planned on the date Iago indicated above. No advanced course? Or are they taken at the same date as happened on 2010 (see the first post of this thread)?

Regards

maddalena

henrik June 8, 2011 11:03

Gridcore AB and Wikki announce the following OpenFOAM Trainings:

Intoductory training in Chicago on 27 and 28 July 2011

Advanced training in Gothenburg on 28 and 29 September 2011

Introductory training in Gothenburg on 28 and 29 September 2011

The trainings are organised in collaboration with IBM.

The courses will be delivered by Prof. Hrvoje Jasak and Dr. Henrik Rusche. Material covered will include use of OpenFOAM as a CFD solver, Overview of OpenFOAM library, and OpenFOAM in Use.

For more details and registration, see the Course Leaflet or visit Wikki and Gompute web sites.

https://www.gompute.com/web/guest/trainings
https://www.wikki.co.uk
https://www.gompute.se

henrik November 7, 2011 13:56

Gridcore AB and Wikki announce the following OpenFOAM Trainings:

Intoductory training in Mainz on 23 and 24 November 2011

Advanced training in Mainz on 23 and 24 November 2011

For more details and registration, see the Course Leaflet or visit Wikki and Gompute web sites.

https://www.gompute.com/web/guest/trainings
https://www.wikki.co.uk
https://www.gompute.se

henrik September 7, 2013 18:39

Wikki has one additional seat available for an

OpenFOAM Introductory Training in Burghausen, Germany on 18 and 19 September 2013

The agenda of the course is:

1) OpenFOAM as a CFD solver
Mesh generation, conversion and set-up: importing Fluent and STAR-CD cases.
Material properties, initial and boundary conditions.
Running the solver, including massively parallel computations.
Data analysis, sampling, graphing and postprocessing.
Hands-on examples.

2) Overview of OpenFOAM library
Basics of C++ programming language (with exercises).
OpenFOAM library organization.
Physical modeling capabilities.
Top-level solver organization: physics, controls, data analysis.
Finite Volume Discretization: theoretical base of OpenFOAM.
Example of using OpenFOAM capabilities in a custom solver.

3) OpenFOAM in Use
Extending OpenFOAM capabilities.
Customized data manipulation.
On-the-fly post-processing.
Implementing a new boundary condition.
Adding a new transport equation.
Wmake build system.
Hands-on examples.
Parallel processing: theoretical basis, data decomposition and reconstruction, impact on coding.

4) Open Forum & Clinic: Questions and Examples including bring your own problem.

The price of the course is 1200 Euros. For more details and registration, please contact Henrik Rusche

Maimouna September 22, 2014 07:11

Dear All,

I'm looking for OpenFOAM training course in the UK during the next period of time. If any provide me all details. I'm really need such course in OpenFOAM.

Kind regards


All times are GMT -4. The time now is 23:44.