[OpenFOAM] paraview / paraFoam: bad, bad behaviour!!!

aerospain · June 4, 2012, 14:50

Hi all,

I run ubuntu 12.04 in my machine. I was running 11.10 a couple of weeks ago and was NOT getting this behaviour from paraview/parafoam.

I have installed paraview3.12.0 from ThirdParty this afternoon in case that sorted my problems, but no luck! And, I get this behaviour either for openfoam2.1.0 or 2.1.1 results.

I'll leave the output to terminal I get from paraview (same from paraFoam) in case someone could help:

Thanks in advance!
C.

Got bus address: "unix:abstract=/tmp/dbus-FBe9dFYWYr,guid=a4eca58a83c7edeb0a4c37240000001b"
Connected to accessibility bus at: "unix:abstract=/tmp/dbus-FBe9dFYWYr,guid=a4eca58a83c7edeb0a4c37240000001b"
Registered DEC: true
Registered event listener change listener: true
FIXME: handle dialog start.
FIXME: handle dialog end.
FIXME: handle dialog start.
FIXME: handle dialog start.
FIXME: handle dialog end.
FIXME: handle dialog end.
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
FIXME: handle dialog start.
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
FIXME: handle dialog end.
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
FIXME: handle dialog start.
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
QSpiAccessible::accessibleEvent not handled: "8008" obj: QComboBoxListView(0x11527e0) ""
FIXME: handle dialog end.
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
FIXME: handle dialog start.
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
QSpiAccessible::accessibleEvent not handled: "8008" obj: QComboBoxListView(0x11527e0) ""
FIXME: handle dialog end.
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
FIXME: handle dialog start.
QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!"
FIXME: handle dialog end.
Inconsistency detected by ld.so: dl-close.c: 759: _dl_close: Assertion `map->l_init_called' failed!

akidess · June 5, 2012, 01:48

Try version 3.14?

niklas · June 5, 2012, 02:13

using my uber-google skills I pasted the error message in the search field and hit the search button

which lead me to this:
https://bugs.launchpad.net/ubuntu/+s...ot/+bug/997462

where it's claimed:

This "bug" seems to be resolved by removing the qt-at-spi package !

it took me 1 minute of hard innovative work and now i deserve to take a break.

aerospain · June 5, 2012, 14:58

uber-duber Niklas :-D

Thank you for the taking the time to google it. For once that I don't do it :-/

<Akidess> if you don't mind, i'll stick to 3.12 with Niklas' trick for the moment

cheers!
C.

June 4, 2012, 14:50	paraview / paraFoam: bad, bad behaviour!!!	#1
aerospain Senior Member aerospain Join Date: Sep 2009 Location: Madrid, Spain Posts: 149 Rep Power: 16	Hi all, I run ubuntu 12.04 in my machine. I was running 11.10 a couple of weeks ago and was NOT getting this behaviour from paraview/parafoam. I have installed paraview3.12.0 from ThirdParty this afternoon in case that sorted my problems, but no luck! And, I get this behaviour either for openfoam2.1.0 or 2.1.1 results. I'll leave the output to terminal I get from paraview (same from paraFoam) in case someone could help: Thanks in advance! C. Got bus address: "unix:abstract=/tmp/dbus-FBe9dFYWYr,guid=a4eca58a83c7edeb0a4c37240000001b" Connected to accessibility bus at: "unix:abstract=/tmp/dbus-FBe9dFYWYr,guid=a4eca58a83c7edeb0a4c37240000001b" Registered DEC: true Registered event listener change listener: true FIXME: handle dialog start. FIXME: handle dialog end. FIXME: handle dialog start. FIXME: handle dialog start. FIXME: handle dialog end. FIXME: handle dialog end. QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" FIXME: handle dialog start. QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" FIXME: handle dialog end. QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" FIXME: handle dialog start. QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" QSpiAccessible::accessibleEvent not handled: "8008" obj: QComboBoxListView(0x11527e0) "" FIXME: handle dialog end. QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" FIXME: handle dialog start. QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" QSpiAccessible::accessibleEvent not handled: "8008" obj: QComboBoxListView(0x11527e0) "" FIXME: handle dialog end. QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" FIXME: handle dialog start. QSpiAccessible::accessibleEvent not handled: "8008" obj: QObject(0x0) " invalid interface!" FIXME: handle dialog end. Inconsistency detected by ld.so: dl-close.c: 759: _dl_close: Assertion `map->l_init_called' failed!

June 5, 2012, 01:48		#2
akidess Senior Member Anton Kidess Join Date: May 2009 Location: Germany Posts: 1,377 Rep Power: 29	Try version 3.14? __________________ On twitter @akidTwit Spend as much time formulating your questions as you expect people to spend on their answer.

June 5, 2012, 02:13		#3
niklas Super Moderator Niklas Nordin Join Date: Mar 2009 Location: Stockholm, Sweden Posts: 693 Rep Power: 29	using my uber-google skills I pasted the error message in the search field and hit the search button which lead me to this: https://bugs.launchpad.net/ubuntu/+s...ot/+bug/997462 where it's claimed: This "bug" seems to be resolved by removing the qt-at-spi package ! it took me 1 minute of hard innovative work and now i deserve to take a break. mcfdma likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bad behaviour for the streamwise fluctuation	crazzy.pirate43	OpenFOAM Running, Solving & CFD	0	May 15, 2018 10:13
[OpenFOAM] paraFoam vs paraView builtin reader for lagrangian solvers	Yann	ParaView	2	September 9, 2017 05:32
[OpenFOAM] paraFoam: line 265: paraview: command not found	maCrobo	ParaView	0	March 9, 2015 15:40
[OpenFOAM] ParaView shows bad cells, checkMesh doesn't seem to notice.	CoolHand	ParaView	2	August 21, 2014 15:58
Problems of Duns Codes!	Martin J	Main CFD Forum	8	August 14, 2003 23:19

June 5, 2012, 14:58		#4
aerospain Senior Member aerospain Join Date: Sep 2009 Location: Madrid, Spain Posts: 149 Rep Power: 16	uber-duber Niklas :-D Thank you for the taking the time to google it. For once that I don't do it :-/ <Akidess> if you don't mind, i'll stick to 3.12 with Niklas' trick for the moment cheers! C.