CFD Online URL
[Sponsors]
Home > Forums > OpenFOAM Paraview & paraFoam

How to use paraFoam on a cluster

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 6, 2013, 11:43
Default How to use paraFoam on a cluster
  #1
New Member
 
Join Date: Oct 2012
Posts: 14
Rep Power: 4
andreas is on a distinguished road
Dear foamers,

I would like to use the paraFoam command on a cluster. I connect my computer on it with an ssh connection. The cluster has paraview installed, so I can run paraview on the terminal and the program is launched.

What I can do to read my files on the cluster is to create a case.foam as wyldckat said on another topic:
Quote:
touch case.foam
and then open it on paraview.

What I would like to do is to get in the folder on the terminal, and just type paraFoam and it would automatically open the simulation. Maybe if I write an "alias paraFoam" in the bashrc?

Here is the response of the terminal when I type paraFoam:
Code:
[andreasgg@hmem00 36cpx12]$ paraFoam 

FATAL ERROR: ParaView reader module libraries do not exist

Please build the reader module before continuing:
cd $FOAM_UTILITIES/postProcessing/graphics/PV3Readers
./Allwclean
./Allwmake
Then I build the reader module:
Code:
[andreasgg@hmem00 36cpx12]$ cd $FOAM_UTILITIES/postProcessing/graphics/PV3Readers
[andreasgg@hmem00 PV3Readers]$ ./Allwclean
+ wclean libso vtkPV3Readers
wclean vtkPV3Readers
+ PV3blockMeshReader/Allwclean
+ rm -f '/usr/local/centFOAM/OpenFOAM/OpenFOAM-2.1.1/platforms/linux64GccDPOpt/lib/libPV3blockMeshReader*'
+ rm -rf PV3blockMeshReader/Make
+ wclean libso vtkPV3blockMesh
wclean vtkPV3blockMesh
+ PV3FoamReader/Allwclean
+ rm -f '/usr/local/centFOAM/OpenFOAM/OpenFOAM-2.1.1/platforms/linux64GccDPOpt/lib/libPV3FoamReader*'
+ rm -rf PV3FoamReader/Make
+ wclean libso vtkPV3Foam
wclean vtkPV3Foam
[andreasgg@hmem00 PV3Readers]$ ./Allwmake
+ '[' -d /usr/local/centFOAM/OpenFOAM/ThirdParty-2.1.1/platforms/linux64GccDPOpt/paraview-3.10.1 -a -r /usr/local/centFOAM/OpenFOAM/ThirdParty-2.1.1/platforms/linux64GccDPOpt/paraview-3.10.1 ']'
But still paraFoam doesn't work, the same response is givenů Any advice would be appreciated :-)

Thanks,
Regards,
Andreas
andreas is offline   Reply With Quote

Old   March 6, 2013, 18:11
Default
  #2
Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 7,514
Blog Entries: 33
Rep Power: 74
wyldckat is a jewel in the roughwyldckat is a jewel in the roughwyldckat is a jewel in the roughwyldckat is a jewel in the rough
Quick answer: ParaView installation problem on Suse 11.4 post #3

PS: I've moved this thread to the dedicated sub-forum for ParaView & paraFoam
wyldckat is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenFoam (Ubuntu): paraFoam via Xming+PuTTY raketenmaid OpenFOAM Paraview & paraFoam 4 February 5, 2013 06:20
Parallel cluster solving with OpenFoam? P2P Cluster? hornig OpenFOAM Programming & Development 8 December 5, 2010 17:06
Can I use FoamX and ParaFoam xiuying OpenFOAM Running, Solving & CFD 1 September 27, 2007 10:32
ParaFoam OF 14 decomposed cases philippose OpenFOAM Paraview & paraFoam 4 April 18, 2007 06:17
Linux Cluster Performance with a bi-processor PC M. FLUENT 1 April 22, 2005 10:25


All times are GMT -4. The time now is 12:32.