CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > ParaView

[OpenFOAM] Paraview different phase with different color

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 14, 2013, 23:37
Default Paraview different phase with different color
  #1
Member
 
Guifan Li
Join Date: Apr 2011
Location: New York City, U.S.
Posts: 96
Rep Power: 14
liguifan is on a distinguished road
Good evening,

Does anyone know how to view the different phase( water and oil ) in paraview.

In dambreak4phase, I can see they are colored differently, however, after I create my own code to simulate a droplet into the water, I found that the oil droplet is quite same as the water base color.

Can anyone tell me how to adjust the color so that I can view the spread of oil on the water?

Thanks
liguifan is offline   Reply With Quote

Old   March 15, 2013, 02:34
Default
  #2
Member
 
Guifan Li
Join Date: Apr 2011
Location: New York City, U.S.
Posts: 96
Rep Power: 14
liguifan is on a distinguished road
To be more precise, I want to view these two phase in different colors.

When I want to exclude the air( so that I can see the droplet inside), I need to use contour or threshold by changing the parameter for the upper threshold or lower threshold. But the results are not really what I want.


Just want to know how does the paraview define the color, i.e. How do set the colors of these phase and is there any other way to with how the droplet fall into the water? (by making air transparent?)
liguifan is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sharing links for two phase solver packages developed by openfoam community swap_9068 OpenFOAM Programming & Development 1 April 2, 2017 06:43
Extract primary phase thread in VOF with 3 phases Eric FLUENT 2 July 7, 2011 03:22
Newbie: Install ParaView 3.81 on OF-1.6-ext/OpenSuse 11.2? lentschi OpenFOAM Installation 1 March 9, 2011 03:32
paraview installation woes vex OpenFOAM Installation 15 January 30, 2011 08:11
Paraview not found fusij OpenFOAM Installation 2 January 1, 2011 21:44


All times are GMT -4. The time now is 08:15.