[OpenFOAM] touch cavityFine/cavityFine.OpenFOAM PROBLEM!

Amir1 · May 30, 2013, 18:07

Hi guys,

I m trying to run the cavityFine on paraFoam based on the cavity problem in the user manual.

I did make the cavityFine file and I did the mapFields. Now I want to open up two files (cavity and cavityFine) with paraView but typing the following commamnd doesnt do anything:

touch cavityFine/cavityFine.OpenFOAM

Any suggestions or comments?
Thanks

wyldckat · June 8, 2013, 16:17

Greetings Amir,

If the command does not give you any errors, then it worked with success. You can check if the file was created by running:

Code:

ls -l cavityFine/cavityFine.OpenFOAM

If it shows you that the file does exist, then open it in the ParaView window you already have open from the first "cavity" case.

Best regards,
Bruno

Amir1 · June 8, 2013, 22:01

Thanks so much.
I will try do check it out and will let you know.

Cheers!
Amir

May 30, 2013, 18:07	touch cavityFine/cavityFine.OpenFOAM PROBLEM!	#1
Amir1 Member Amir Join Date: Sep 2012 Posts: 47 Rep Power: 13	Hi guys, I m trying to run the cavityFine on paraFoam based on the cavity problem in the user manual. I did make the cavityFine file and I did the mapFields. Now I want to open up two files (cavity and cavityFine) with paraView but typing the following commamnd doesnt do anything: touch cavityFine/cavityFine.OpenFOAM Any suggestions or comments? Thanks

June 8, 2013, 16:17		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings Amir, If the command does not give you any errors, then it worked with success. You can check if the file was created by running: Code: ls -l cavityFine/cavityFine.OpenFOAM If it shows you that the file does exist, then open it in the ParaView window you already have open from the first "cavity" case. Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UDF compiling problem	Wouter	Fluent UDF and Scheme Programming	6	June 6, 2012 04:43
paraFoam touch problem	DiegoNaval	OpenFOAM	0	August 4, 2011 05:05
Gambit - meshing over airfoil wrapping (?) problem	JFDC	FLUENT	1	July 11, 2011 05:59
natural convection problem for a CHT problem	Se-Hee	CFX	2	June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13

June 8, 2013, 22:01		#3
Amir1 Member Amir Join Date: Sep 2012 Posts: 47 Rep Power: 13	Thanks so much. I will try do check it out and will let you know. Cheers! Amir