CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > ParaView

[OpenFOAM] paraView not opening

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 22, 2015, 02:56
Default paraView not opening
  #1
New Member
 
Petya Stoyanova
Join Date: Jul 2015
Posts: 4
Rep Power: 10
Razielka is on a distinguished road
To anyone who's reading,
I am a total beginner in CFD and it is my first time using SSH and OpenFOAM. I work on 64-bit Windows OS and I access OpenFOAM via the Cygwin terminal. I tried to do the first tutorial but when I type paraFoam in the terminal what happens is that ParaView starts opening but then it freezes and the content in the newly opened windows doesn't show and in the terminal I receive the following error messages:

X Error: BadValue (integer parameter out of range for operation) 2
Extension: 149 (Uknown extension)
Minor opcode: 3 (Unknown request)
Resource id: 0x0
X Error: GLXBadContext 151
Extension: 149 (Uknown extension)
Minor opcode: 5 (Unknown request)
Resource id: 0x10002bc

I tried looking around the internet for solution but since I'm still learning how to use SSH almost everything seems like Chinese to me. I also tried searching in this forum, but probably because I don't understand anything I wasn't able to recognize whether somebody has had similar problem.

If it is of any relevance, when I type paraFoam --version it returns paraview 3.12.0. I think that OpenFOAM itself is properly installed. I don't know what they did exactly (they did it too fast and I knew too little to understand) but I think they just copied the OpenFOAM tutorial files like they did for everybod else, but I'm the only one that encounters this problem. I don't know if that's enough information, but I'd be extremely grateful if someone helps me!
Razielka is offline   Reply With Quote

Reply

Tags
error, not opening, openfoam, parafoam, paraview

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[General] Problem opening paraview (remote) alexvaleije ParaView 0 June 23, 2016 13:03
[OpenFOAM] opening .stl file in paraview gokulcfd ParaView 2 March 16, 2015 16:37
[General] Problems opening .vtu in ParaView Bartek ParaView 0 January 17, 2010 07:21
paraFoam reader for OpenFOAM 1.6 smart OpenFOAM Installation 13 November 16, 2009 22:41
Paraview crash after opening OF case gfilip OpenFOAM Installation 4 October 14, 2009 15:46


All times are GMT -4. The time now is 11:40.