[OpenFOAM] After setting MeshScalingFactor in Gmsh

zhoubinwx · October 19, 2008, 10:14

Dear all,

I want to set the dimension in Gmsh instead of using "transformPoints -scale '(1E-6 1E-6 1E-6)'" after gmshTofoam, I use "Mesh.ScalingFactor = 1e-06;"

I could see that the nodes data are fine, but I could not see the geometry in paraFoam.

When I disable this "Mesh.ScalingFactor = 1e-06;", I could see the geometry quite well.

Therefore, I would like to post a simple case here. This attached you could see the geometry, then when you disable the comment "Mesh.ScalingFactor = 1e-06;" in .geo file, you will have the problem.

box.

If you know it, please let me know, thank you.

Best regards,

Bin

zhoubinwx · October 19, 2008, 10:15

sorry, the attached case is here:

box_paraFoam.geo

October 19, 2008, 10:14	After setting MeshScalingFactor in Gmsh	#1
zhoubinwx Senior Member ZHOU Bin Join Date: Mar 2009 Location: Nanjing/Torino, Nanjing/Piemente, China/Italy Posts: 164 Rep Power: 17	Dear all, I want to set the dimension in Gmsh instead of using "transformPoints -scale '(1E-6 1E-6 1E-6)'" after gmshTofoam, I use "Mesh.ScalingFactor = 1e-06;" I could see that the nodes data are fine, but I could not see the geometry in paraFoam. When I disable this "Mesh.ScalingFactor = 1e-06;", I could see the geometry quite well. Therefore, I would like to post a simple case here. This attached you could see the geometry, then when you disable the comment "Mesh.ScalingFactor = 1e-06;" in .geo file, you will have the problem. box. If you know it, please let me know, thank you. Best regards, Bin

October 19, 2008, 10:15	sorry, the attached case is he	#2
zhoubinwx Senior Member ZHOU Bin Join Date: Mar 2009 Location: Nanjing/Torino, Nanjing/Piemente, China/Italy Posts: 164 Rep Power: 17	sorry, the attached case is here: box_paraFoam.geo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] determining displacement for added points	CFDnewbie147	OpenFOAM Meshing & Mesh Conversion	1	October 22, 2013 09:53
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
Cells with t below lower limit	Purushothama	Siemens	2	May 31, 2010 21:58
[Gmsh] Import problem	ARC	OpenFOAM Meshing & Mesh Conversion	0	February 27, 2010 10:56
Warning 097-	AB	Siemens	6	November 15, 2004 04:41