|
[Sponsors] |
March 30, 2006, 13:40 |
Interesting but not in release
|
#101 |
Senior Member
Mattijs Janssens
Join Date: Mar 2009
Posts: 1,419
Rep Power: 26 |
Interesting but not in release notes: 1.3 foamToVTK runs in parallel. Produces one VTK directory per processor. Has got some new useful command line options as well (e.g. -allPatches)
|
|
April 20, 2006, 08:26 |
Using release 1.3: test on lau
|
#102 |
New Member
Fran�ois Cauneau
Join Date: Mar 2009
Location: Sophia Antipolis, France
Posts: 8
Rep Power: 17 |
Using release 1.3: test on launching paraview-2.4.2 from inside FoamX (testcase is tutorial icoFoam/cavity). Everything fine, except on calculating streamlines. Error Message is:
ErrorMessage # Error or warning: There was a VTK Error in file: ../../../../../paraview-2.4.2/VTK/Filtering/vtkDemandDrivenPipeline.cxx (661) vtkCompositeDataPipeline (0x92c4200): Input port 0 of algorithm vtkDistributedStreamTracer(0x92c5be8) has 4 connections but is not repeatable. ErrorMessage end Other glyphs and 3D objects display quite normally... I shall try to hack a little to know more. NB1: Host system is a linux-mandriva (kernel 2.6.12), running on a laptop dell latitude (i586). NB2: For the X server, "DRI" is off, as it is not compatible vith some calls of the PatchTool interface. Switching it on doesn't fix the present VTK problem. NB3: Everything works fine with the couple OpenFOAM-1.2/paraview-2.2.0 on the same machine. François Cauneau |
|
May 14, 2006, 10:36 |
Hello Foam Guys
I experimen
|
#103 |
Member
|
Hello Foam Guys
I experiment the same troubles that Francois Cauneau, both in my house machine (amd 32 bits) as well in my job (amd 64) using openfoam 1.3 + paraview 2.4.2. Somebody can help us? Many tanks in advance Wladimyr |
|
July 15, 2006, 07:00 |
the following is the error mes
|
#104 |
New Member
Sreekanth Kolan
Join Date: Mar 2009
Posts: 13
Rep Power: 17 |
the following is the error message i get when i try to open paraview. My aim is to plot stream lines for backward facing step flow. can some one tell how to do that with lines/points/ribbons instead of tubes.
also i need help regarding this error. i tried reinstalling but still ended up with same error. so, plzzzzz help me as soon as u can newton{skolan,53}% ErrorMessage # Error or warning: ERROR: In ../../../../../paraview-2.4.2/Utilities/VTKClientServer/vtkClientServerInterpret er.cxx, line 866 vtkClientServerInterpreter (0x80664b8): Cannot find module "libPVFoamReader.so". The following paths were searched: /home/reynolds/skolan/OpenFOAM/linux/paraview-2.4.2/lib/paraview-2.4 /home/user/skolan/OpenFOAM/OpenFOAM-1.3/lib/linuxGcc4DPOpt/lam-7.1.1 /home/user/skolan/OpenFOAM/OpenFOAM-1.3/src/lam-7.1.1/platforms/linuxGcc4DPOpt/l ib /home/user/skolan/OpenFOAM/linux/gcc-4.1.0/lib /home/user/skolan/OpenFOAM/skolan-1.3/lib/linuxGcc4DPOpt /home/user/skolan/OpenFOAM/OpenFOAM-1.3/lib/linuxGcc4DPOpt /usr/local/lib /home/user/skolan/OpenFOAM/linux/paraview-2.4.2/lib /home/user/skolan/OpenFOAM/OpenFOAM-1.3/src/lam-7.1.1/platforms/linuxGcc4DPOpt/b in /home/user/skolan/OpenFOAM/OpenFOAM-1.3/src/mico-2.3.11/platforms/linuxGcc4DPOpt /bin /home/user/skolan/OpenFOAM/linux/j2sdk1.4.2_05/bin /home/user/skolan/OpenFOAM/linux/gcc-4.1.0/bin /home/user/skolan/OpenFOAM/skolan-1.3/applications/bin/linuxGcc4DPOpt /home/user/skolan/OpenFOAM/OpenFOAM-1.3/applications/bin/linuxGcc4DPOpt /home/user/skolan/OpenFOAM/OpenFOAM-1.3/wmake /home/user/skolan/OpenFOAM/OpenFOAM-1.3/bin /usr/X11/bin /usr/local/bin /usr/bin /bin /etc /local/Tecplot10.0//bin /home/user/skolan/OpenFOAM/linux/paraview-2.4.2/bin /usr/lib /usr/lib/vtk /usr/local/lib /usr/local/lib/vtk ERROR: In ../../../../../paraview-2.4.2/GUI/Client/vtkPVXMLPackageParser.cxx, line 677 vtkPVXMLPackageParser (0x88475d8): Error loading Library component PVFoamReader ErrorMessage end |
|
July 15, 2006, 07:03 |
forgot to tell u guys that i a
|
#105 |
New Member
Sreekanth Kolan
Join Date: Mar 2009
Posts: 13
Rep Power: 17 |
forgot to tell u guys that i am working on inux machine
|
|
September 21, 2006, 02:50 |
Hello,
I tried the conjugateF
|
#106 |
Senior Member
Dragos
Join Date: Mar 2009
Posts: 648
Rep Power: 20 |
Hello,
I tried the conjugateFoam7 solver and it went well after I got the help from you to compile the source. Now I want to see the results. Having multiple regions seems to enforce the usage of foamToVTK. Well, I tried it, and I can see the temperature field for instance, but no velocity. It is obvious that when I ran it, the program complains about something: dragosm@casp02:~/OpenFOAM/dragosm-1.3/run/conjugateHeat> foamToVTK ./ Conjugate_pipe -mesh region1 -latestTime /*---------------------------------------------------------------------------*\ | ========= | | | \ / F ield | OpenFOAM: The Open Source CFD Toolbox | | \ / O peration | Version: 1.3 | | \ / A nd | Web: http://www.openfoam.org | | \/ M anipulation | | \*---------------------------------------------------------------------------*/ Exec : foamToVTK ./ Conjugate_pipe -mesh region1 -latestTime Date : Sep 21 2006 Time : 09:05:11 Host : casp02 PID : 13723 Root : /fsd/soft/OpenFOAM/dragosm-1.3/run/conjugateHeat/ Case : Conjugate_pipe Nprocs : 1 Create time --> FOAM Warning : From function objectRegistry::checkIn(regIOobject&) in file db/objectRegistry/objectRegistry.C at line 51 Registering object 'region1' with objectRegistry 'time' This is only appropriate for registering the regions of a multi-region computation or in other special circumstances. Otherwise please register this object with it's region (mesh) Time 19 volScalarFields : rho p T volVectorFields : U pointScalarFields : pointVectorFields : Internal : "/fsd/soft/OpenFOAM/dragosm-1.3/run/conjugateHeat//Conjugate_pipe/VTK/region1/Co njugate_pipe_381.vtk" Original cells:400 points:861 Additional cells:0 additional points:0 --> FOAM FATAL ERROR : Not implemented From function void CyclicPointPatchField<patchfield,>::evaluate() in file /home/dm2/henry/OpenFOAM/OpenFOAM-1.3/src/OpenFOAM/lnInclude/CyclicPointPatchFie ld.C at line 187. FOAM aborting Foam::error::printStack(Foam:: Ostream&) Foam::error::abort() Foam::GeometricField<double,>::GeometricBoundaryFi eld::evaluate() void Foam::volPointInterpolation::interpolate<double>(F oam::GeometricField<double,> const&, Foam::GeometricField<double,>& ) const Foam::tmp<foam::geometricfield<double,> > Foam::volPointInterpolation::interpolate<double>(F oam::GeometricField<double,> c onst&) const foamToVTK [0x41a70c] foamToVTK [0x437dc9] __libc_start_main __gxx_personality_v0 Aborted Can you give me a hint in the right direction to solve this problem? Regards, Dragos |
|
September 21, 2006, 05:01 |
Use the search facility. Look
|
#107 |
Senior Member
Mattijs Janssens
Join Date: Mar 2009
Posts: 1,419
Rep Power: 26 |
Use the search facility. Look for CyclicPointPatchField.
http://www.cfd-online.com/cgi-bin/Op...=7286#POST7286 |
|
September 21, 2006, 06:59 |
Hi Mattijs,
The solution work
|
#108 |
Senior Member
Dragos
Join Date: Mar 2009
Posts: 648
Rep Power: 20 |
Hi Mattijs,
The solution worked immediately. Thanks! By the way, I always search first the forum, before I add my question. My fault is that I searched for the wrong key ("foamToVTK" instead for the actual error). Regards, Dragos |
|
December 20, 2006, 18:16 |
Hi,
I was wondering if anyone
|
#109 |
New Member
Shawn Pfeil
Join Date: Mar 2009
Posts: 11
Rep Power: 17 |
Hi,
I was wondering if anyone could give me a pointer on what a foamToVTK error message means. I am running twoLiquidMixingFoam without any problems in the simulation, but when I run foamToVTK it spits out. --> FOAM FATAL IO ERROR : size 6000 is not equal to the given value of 10400 file: /home/shp/OpenFOAM/shp-1.3/run/interFoam//tmix/0.01/gamma_0 from line 25 to line 6121. From function Field<type>::Field(const word& keyword, const dictionary& dict, const label s) in file /home/dm2/henry/OpenFOAM/OpenFOAM-1.3/src/OpenFOAM/lnInclude/Field.C at line 223. FOAM exiting I looked at the data file and their are 6000 data points for gamma but I don't know where this other number 10400 is defined. I am a little bit of a newbie still, so I have to apologize for my lack of error message knowledge. Shawn |
|
December 20, 2006, 18:38 |
Take a look at the file:
0.
|
#110 |
Senior Member
Hrvoje Jasak
Join Date: Mar 2009
Location: London, England
Posts: 1,905
Rep Power: 33 |
Take a look at the file:
0.01/gamma_0 and swee what the field size is. It should be the same as the number of cells in the mesh. If it is not, delete it. Do that with all other fields if the error appears again. You can find the number of cells in the comment (under nCells) in constant/polyMesh/owner Enjoy, Hrv
__________________
Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk |
|
September 6, 2007, 00:25 |
Hi,
When I save view image,
|
#111 |
Guest
Posts: n/a
|
Hi,
When I save view image, suddenly paraview is terminated and error occurs↓↓↓ ×Erroe of failed request:GLXBadContext  Major opcode of failed request:143(GLX)  Minor opcode of failed request:5(X_GLXMakeCurrent)  Serial number of failed request:72026  Current serial number in output sream72026 What kind of error is this?? |
|
September 6, 2007, 01:25 |
I have solved this irritating
|
#112 |
Senior Member
Srinath Madhavan (a.k.a pUl|)
Join Date: Mar 2009
Location: Edmonton, AB, Canada
Posts: 703
Rep Power: 21 |
I have solved this irritating problem before. Here you go -> http://www.cfd-online.com/OpenFOAM_D...es/1/4438.html
|
|
September 7, 2007, 03:21 |
Thank you.
I'll check it.
|
#113 |
Guest
Posts: n/a
|
Thank you.
I'll check it. Atsu |
|
October 25, 2007, 02:30 |
Dear All
would you please a
|
#114 |
New Member
Armin Hosseinian
Join Date: Mar 2009
Location: Perth, Western Australia, Australia
Posts: 17
Rep Power: 17 |
Dear All
would you please any one let me know, which kind of problem has my paravies which shows the following error? and what should i do with that? i use OpenFoam 1.4 , with paraview 2.4.4. # Error or warning: There was a VTK Error in file: /home/dm2/henry/OpenFOAM/linuxSrc/paraview-2.4.4/VTK/Filtering/vtkDemandDrivenPi peline.cxx (651) vtkStreamingDemandDrivenPipeline (0x99c8b00): Input port 0 of algorithm vtkAppendFilter(0x99c81a8) has 0 connections but is not optional. MANY THANKS ARMIN |
|
June 25, 2008, 21:51 |
hi everyone,
i need to gene
|
#115 |
New Member
nikhil babu madduri
Join Date: Mar 2009
Posts: 17
Rep Power: 17 |
hi everyone,
i need to generate a mesh around a cylnder. i have started with quarter of it. now how to complete it? i tried with filter>Reflection in paraview. it was working but i have a doubt that paraview being just a viewing tool, if i take the reflection, is it really going to change my computational domain physically?? this is a kind of urgent. reply will be greatly appreciated. regards, nike |
|
June 26, 2008, 03:57 |
You just need to do what you h
|
#116 |
Senior Member
Niels Gjoel Jacobsen
Join Date: Mar 2009
Location: Copenhagen, Denmark
Posts: 1,900
Rep Power: 37 |
You just need to do what you have done already three more times to end the circle, i.e. you have to generate the mesh around the entire cylinder using whatever meshing-tool you are comfortable with.
ParaView is "merely" a postprocessing tool. / Niels
__________________
Please note that I do not use the Friend-feature, so do not be offended, if I do not accept a request. |
|
June 26, 2008, 04:28 |
thanq Niels,
I am able to d
|
#117 |
New Member
nikhil babu madduri
Join Date: Mar 2009
Posts: 17
Rep Power: 17 |
thanq Niels,
I am able to do it by inputting all the other 3 parts too again and was able to generate the whole cylinder using blockmesh. but since rest 3 parts are just symmetric along either x or z axes, do i have any tool which can just take the mirror image such that my tedious job of inputting all again will be reduced? regards, nike. |
|
July 20, 2008, 05:57 |
hi Henry,
I was reading yo
|
#118 |
Senior Member
mayank gupta
Join Date: Mar 2009
Posts: 110
Rep Power: 17 |
hi Henry,
I was reading your post above and would like to ask you regarding a problem of pre-installed paraveiw. I am unable to execute the command paraFoam correctly. i get the following error mayank-guptas-macbook:icoFoam mayankgupta$ paraFoam ~/openfoam/mayankgupta-1.4.1/run/icoFoam cavity /Users/mayankgupta/OpenFOAM/OpenFOAM-1.4.1/bin/paraFoam: line 75: paraview: command not found can u help me fix this problem. I have installed paraview as a disk image and i am completely new to linux and no nothing about computers. secondy i was trying ur solutions of setting the environment for paraview but i could not find the paraview directory in the applications directory of openfoam-1.4.1 please help. thanx |
|
August 25, 2008, 06:39 |
Dear All:
The following opt
|
#119 |
Senior Member
musaddeque hossein
Join Date: Mar 2009
Posts: 309
Rep Power: 18 |
Dear All:
The following options are given for suitable Qt for different versions of SuSE: The default versions of Qt used by some GNU/Linux releases are as follows. * ubuntu-7.10: Version 4.3.2 * ubuntu-8.04: Version 4.3.4 * openSuSE-10.2: Version 4.2.1 - too old * openSuSE-10.3: Version 4.3.1 * openSuSE-11.0: Version 4.4.0 - too new I am running SuSE 10.0 Does this mean I will need to upgrade to 10.3, or is there something availabe for 10.0 Thanks Musa |
|
October 3, 2008, 15:11 |
Dear All:
just managed to s
|
#120 |
New Member
Annika Gram
Join Date: Mar 2009
Location: Stockholm, Sweden
Posts: 7
Rep Power: 17 |
Dear All:
just managed to start paraView for OF1.5. It looks wonderful! However: it seems like running a case does not produce any files for paraView to read, that is, I can see the mesh doing the cavity tutorial. But there is no way I can get any additional info after running icoFoam. The same goes for the damBreak after running interFoam (looks ok while running). What could be wrong? My OS is Ubuntu 8.04. Thanx, Annika |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[OpenFOAM] Paraview problem: loading the VTK cellSets changes the time | anon_q | ParaView | 1 | November 3, 2018 20:53 |
[General] How to relate tensor data in vtk file to Paraview | awa5114 | ParaView | 0 | March 7, 2017 04:56 |
[General] Creating VTK image compatible to Paraview Visualizer | het | ParaView | 0 | January 7, 2016 08:20 |
[OpenFOAM] Annoying issue of automatic "Rescale to Data Range " with paraFoam/paraview 3.12 | keepfit | ParaView | 60 | September 18, 2013 03:23 |
[General] paraview ignores SPACING in STRUCTURED_POINTS vtk data? | jaffar | ParaView | 0 | November 27, 2012 09:36 |