CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > ParaView

[General] Ensight 6 imported case error

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 29, 2016, 06:40
Default Ensight 6 imported case error
  #1
New Member
 
Jorge Inglessis
Join Date: Jun 2016
Posts: 3
Rep Power: 9
jingless is on a distinguished road
Hi there,

We are working with Syrthes thermal. The output of such program is written in Ensight case format, version 6. All data is imported correctly from Paraview 4.3.1 except for one node, we tested in several different problems, whose temperature nodal value is incorrect. It should be 7.12e+02, and ends up being 7.12e22, to give an example. Therefore, the maximum is unreal and the whole surface plot is ruined. I checked with Paravis inside Salome 7.7.1 and 7.6.0, and also, as pointed out before with Paraview 4.3.1.

I also run the ens_checker (ensight case file health checker) on the files and they seem to be ok. I also inspected the results file and all nodal data is correct, no e+22 found in these files.

Did anybody have the same problem? It seems related to the Ensight reader or plugin used by Paravis/Paraview.

Any help would be much appreciated.

Regards,

Jorge
jingless is offline   Reply With Quote

Reply

Tags
ensight, import, paraview, syrthes

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Building OpenFOAM1.7.0 from source ata OpenFOAM Installation 46 March 6, 2022 14:21
[DesignModeler] DesignModeler Scripting: How to get Full Command Access ANT ANSYS Meshing & Geometry 53 February 16, 2020 16:13
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh gschaider OpenFOAM Community Contributions 300 October 29, 2014 19:00
[swak4Foam] groovyBC: problems compiling: "flex: not found" and "undefined reference to ..." sega OpenFOAM Community Contributions 12 February 17, 2010 10:30
Compiling problems with hello worldC fw407 OpenFOAM Installation 21 January 6, 2008 18:38


All times are GMT -4. The time now is 10:00.