CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > ParaView

[OpenFOAM] Printing text in paraFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 3, 2007, 12:02
Default Printing text in paraFoam
  #1
Member
 
Christian Lindbäck
Join Date: Mar 2009
Posts: 55
Rep Power: 17
christian is on a distinguished road
How can I, in paraFoam, print text in the current window at an arbitrary position? This is to explain what is plotted.

Best regards,
Christian Svensson
christian is offline   Reply With Quote

Old   September 3, 2007, 14:54
Default In the right side main display
  #2
Senior Member
 
Srinath Madhavan (a.k.a pUl|)
Join Date: Mar 2009
Location: Edmonton, AB, Canada
Posts: 703
Rep Power: 21
msrinath80 is on a distinguished road
In the right side main display window, look around the top left corner. You'll see a button called '3D view'. Click it. Alternately you can select '3D view properties' from the View menu. Now, you should select the 'Annotate' tab from the left frame. In the 'Corner Annotation' section, you can choose to write stuff on all four corners of the display window or just the ones where you want.

Hope that helps.
msrinath80 is offline   Reply With Quote

Old   September 6, 2007, 09:33
Default That I know, what I want to do
  #3
Member
 
Christian Lindbäck
Join Date: Mar 2009
Posts: 55
Rep Power: 17
christian is on a distinguished road
That I know, what I want to do is to print text at an arbitrary position. Is this not possible?
christian is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[OpenFOAM] Unable to launch parafoam & boonhow ParaView 5 March 23, 2022 09:09
[OpenFOAM.com] paraFoam cannot open due to Qt issues - [Solved/Information] u2berggeist OpenFOAM Installation 2 July 2, 2018 18:03
Rounding Values in Post stifelistefan CFX 4 March 5, 2014 09:10
[OpenFOAM] How to use paraFoam on a cluster andreas ParaView 1 March 6, 2013 18:11
[OpenFOAM] OpenFoam (Ubuntu): paraFoam via Xming+PuTTY raketenmaid ParaView 4 February 5, 2013 06:20


All times are GMT -4. The time now is 06:50.