CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Paraview & paraFoam (http://www.cfd-online.com/Forums/openfoam-paraview/)
-   -   Reading 3d cases with paraFoam (http://www.cfd-online.com/Forums/openfoam-paraview/61224-reading-3d-cases-parafoam.html)

sriharsha December 28, 2006 10:08

Hi, I am new to OpenFoam an
 
Hi,

I am new to OpenFoam and am trying to use paraFoam for post processing. It works well with 2-d cases. However when i try to read 3d cases the application crashes. Can someone help me with this issue. I am enclosing the error message below:

Thankyou

*************error message************************

--> FOAM FATAL ERROR : Not implemented

From function void CyclicPointPatchField<patchfield,>::evaluate()
in file /home/dm2/henry/OpenFOAM/OpenFOAM-1.3/src/OpenFOAM/lnInclude/CyclicPointPatchFie ld.C at line 187.

FOAM aborting

/home/kandsri/OpenFOAM/linuxAMD64/paraview-2.4.2/lib/paraview-2.4/paraview-real: symbol lookup error: /home/kandsri/OpenFOAM/OpenFOAM-1.3/lib/linuxAMD64Gcc4DPOpt/libOpenFOAM.so: undefined symbol: cplus_demangle

mattijs January 1, 2007 08:03

This has been discussed before
 
This has been discussed before. Have a search for
CyclicPointPatchField.

sriharsha January 1, 2007 13:58

Hi, I have read the disc
 
Hi,
I have read the discussion for CyclicPointPatchField and i have commented the line
in the file CyclicPointPatchField.C and recompiled the library but now i have the issue with demangle.h. I have the library libiberty.a in "OpenFOAM/linuxAMD64/gcc-4.1.0/lib/libiberty.a" but i do not know how to proceed from here. Can you give me some instructions.

Thank you

mattijs January 2, 2007 16:21

Install the library on your sy
 
Install the library on your system that contains demangle.h (libiberty?). Or get one from the gcc-4.1.0 source tree.

sriharsha January 4, 2007 11:53

Thanks Mattijs,
 
Thanks Mattijs,
This resolved the problem.

tj22 January 23, 2007 14:52

You could also try out the new
 
You could also try out the new native paraview reader in the ParaView 2.6 CVS.


All times are GMT -4. The time now is 09:49.