CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Paraview & paraFoam (http://www.cfd-online.com/Forums/openfoam-paraview/)
-   -   ParaFoam error message (http://www.cfd-online.com/Forums/openfoam-paraview/61233-parafoam-error-message.html)

joey September 25, 2006 22:36

I compile OpenFOAM-1.3 with th
 
I compile OpenFOAM-1.3 with the command :
./Allwmake 2>error.txt
and I got those messages as below in error.txt
:
+ cd basic
+ ./Allwmake
+ wmake laplacianFoam
+ wmake potentialFoam
+ wmake scalarTransportFoam
+ cd incompressible
+ ./Allwmake
+ wmake icoFoam
+ wmake icoDyMFoam
+ wmake nonNewtonianIcoFoam
+ wmake simpleFoam
+ wmake turbFoam
+ wmake boundaryFoam
+ cd heatTransfer
+ ./Allwmake
+ wmake buoyantFoam
+ wmake buoyantSimpleFoam
+ cd compressible
+ ./Allwmake
+ wmake rhoTurbFoam
+ wmake rhoSimpleFoam
+ wmake sonicFoam
+ wmake rhoSonicFoam
+ cd rhopSonicFoam
+ Allwmake
./Allwmake: line 8: Allwmake: command not found
+ wmake sonicFoamAutoMotion
+ wmake sonicLiquidFoam
+ wmake sonicTurbFoam
+ cd combustion
+ ./Allwmake
+ wmake XiFoam
+ wmake Xoodles
+ wmake reactingFoam
+ wmake coldEngineFoam
+ wmake engineFoam
+ wmake dieselFoam
+ wmake dieselEngineFoam
+ cd DNSandLES
+ ./Allwmake
+ wmake oodles
+ wmake coodles
+ wmake channelOodles
+ wmake dnsFoam
+ cd multiphase
+ ./Allwmake
+ cd interFoam
+ ./Allwmake
+ wmake lesInterFoam
+ wmake rasInterFoam
+ wmake bubbleFoam
+ wmake settlingFoam
+ wmake twoLiquidMixingFoam
+ cd twoPhaseEulerFoam
+ ./Allwmake
+ cd electromagnetics
+ ./Allwmake
+ wmake mhdFoam
+ wmake electrostaticFoam
+ cd stressAnalysis
+ ./Allwmake
+ cd financial
+ ./Allwmake
+ cd errorEstimation
+ ./Allwmake
+ wmake estimateScalarError
+ wmake icoErrorEstimate
+ wmake momentScalarError
+ wmake icoMomentError
+ cd mesh
+ ./Allwmake
+ cd generation
+ ./Allwmake
+ wmake blockMesh
+ wmake extrudeMesh
+ cd manipulation
+ ./Allwmake
+ wmake transformPoints
+ wmake rotateMesh
+ wmake checkMesh
+ wmake attachMesh
+ wmake zipUpMesh
+ wmake deformedGeom
+ wmake subsetMesh
+ wmake mirrorMesh
+ wmake flattenMesh
+ wmake mergeMeshes
+ wmake splitMesh
+ wmake renumberMesh
+ wmake tetDecomposition
+ wmake moveMesh
+ wmake moveDynamicMesh
+ wmake moveEngineMesh
+ wmake splitMeshRegions
+ wmake insideCells
+ wmake couplePatches
+ wmake stitchMesh
+ wmake autoPatch
+ wmake refineMesh
+ wmake objToVTK
+ wmake createPatch
+ wmake cellSet
+ wmake faceSet
+ wmake pointSet
+ cd patchTool
+ ./Allwmake
+ cd conversion
+ ./Allwmake
+ cd ccm24ToFoam
+ ./Allwmake
+ cd libccmio
+ wmake libso libadf
+ cd libccmio
+ wmake libso libccmio
+ cd ccm24ToFoam
+ wmake
+ wmake starToFoam
+ wmake sammToFoam
+ wmake ansysToFoam
+ wmake cfxToFoam
+ wmake gambitToFoam
+ wmake fluentMeshToFoam
+ wmake kivaToFoam
+ wmake plot3dToFoam
+ wmake netgenNeutralToFoam
+ wmake foamMeshToFluent
+ wmake gmshToFoam
+ wmake mshToFoam
+ wmake tetgenToFoam
+ wmake writeMeshObj
+ wmake polyDualMesh
+ cd advanced
+ ./Allwmake
+ wmake autoRefineMesh
+ wmake refineWallLayer
+ wmake selectCells
+ wmake combinePatchFaces
+ wmake collapseEdges
+ wmake removeFaces
+ wmake splitCells
+ wmake refinementLevel
+ wmake modifyMesh
+ cd surface
+ ./Allwmake
+ wmake surfaceAdd
+ wmake surfaceCheck
+ wmake surfaceCoarsen
+ wmake surfaceConvert
+ wmake surfaceFind
+ wmake surfaceMeshTriangulate
+ wmake surfacePointMerge
+ wmake surfaceSetOutside
+ wmake surfaceSmooth
+ wmake surfaceSubset
+ wmake surfaceToPatch
+ wmake surfaceSplitNonManifolds
+ wmake surfaceTransformPoints
+ wmake surfaceSplitByPatch
+ wmake surfaceClean
+ cd parallelProcessing
+ ./Allwmake
+ '[' LAM ']'
+ cd decompositionMethods
+ ./Allwmake
+ wmake decomposePar
+ wmake reconstructPar
+ wmake reconstructParMesh
+ cd postProcessing
+ ./Allwmake
+ cd dataConversion
+ ./Allwmake
+ wmake foamDataToFluent
+ wmake foamToFieldview9
+ wmake foamToEnsight
+ wmake foamToVTK
+ wmake smapToFoam
+ wmake foamToGMV
+ cd graphics
+ ./Allwmake
+ '[' /home/test/OpenFOAM/linux/paraview-2.4.3/lib/paraview-2.4 -a -r /home/test/OpenFOAM/linux/paraview-2.4.3/lib/paraview-2.4 ']'
+ cd PVFoamReader
+ ./Allwmake
+ '[' '!' linux = solaris ']'
+ wmake libso ensight76FoamExec
+ cd scalarField
+ ./Allwmake
+ wmake pPrime2
+ cd velocityField
+ ./Allwmake
+ wmake Lambda2
+ wmake Mach
+ wmake Q
+ wmake Ucomponents
+ wmake divU
+ wmake enstrophy
+ wmake magGradU
+ wmake magU
+ wmake streamFunction
+ wmake uprime
+ wmake vorticity
+ wmake Co
+ wmake Pe
+ wmake flowType
+ cd stressField
+ ./Allwmake
+ wmake R
+ wmake Rcomponents
+ wmake stressComponents
+ cd wall
+ ./Allwmake
+ wmake checkYPlus
+ wmake wallGradU
+ wmake wallShearStress
+ wmake wallHeatFlux
+ wmake yPlusLES
+ cd miscellaneous
+ ./Allwmake
+ wmake sample
+ wmake sampleSurface
+ wmake postChannel
+ wmake wdot
+ wmake ptot
+ wmake engineCompRatio
+ wmake writeCellCentres
+ cd preProcessing
+ ./Allwmake
+ cd FoamX
+ ./Allwmake
+ wmake setFields
+ wmake mapFields
+ wmake boxTurb
+ wmake engineSwirl
+ cd thermophysical
+ ./Allwmake
+ wmake adiabaticFlameT
+ wmake mixtureAdiabaticFlameT
+ wmake equilibriumFlameT
+ wmake equilibriumCO
+ wmake chemkinToFoam
+ cd miscellaneous
+ ./Allwmake
+ wmake foamDebugSwitches
+ wmake foamInfoExec
I am not familiar with gcc and linux, I do not know what's wrong with compiling. And after compiling I can run the FoamX, but when I run the paraFoam I got message as below:
[test@Joey zhangwei]$ paraFoam $FOAM_RUN/tutorials/icoFoam cavity
Xlib: extension "XFree86-DRI" missing on display ":0.0".
/*---------------------------------------------------------------------------*\
| ========= | |
| \ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \ / O peration | Version: 1.3 |
| \ / A nd | Web: http://www.openfoam.org |
| \/ M anipulation | |
\*---------------------------------------------------------------------------*/

ErrorMessage
# Error or warning: There was a VTK Error in file: /home/test/OpenFOAM/linux/paraview-2.4.3/VTK/Filtering/vtkExecutive.cxx (715)
vtkCompositeDataPipeline (0x8d848d8): UpdateData invoked during another request. Returning failure to algorithm vtkFoamReader(0x8d83fa8).
ErrorMessage end
/home/test/OpenFOAM/OpenFOAM-1.3/bin/paraFoam: line 57: 6414 Segmentation fault paraview paraFoam.pvs

How can I solve this problem?
Thanks in advance

jens_klostermann October 2, 2006 13:28

Hi, just check if installed
 
Hi,

just check if installed the right paraview version. In your case paraFoam is expecting version 2.4.3

Jens


All times are GMT -4. The time now is 07:02.