CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > ParaView

[OpenFOAM] Could anybody help me about the paraFoam problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 3, 2006, 11:28
Default Could anybody help me about the paraFoam problem
  #1
Senior Member
 
Guoxiang
Join Date: Mar 2009
Posts: 109
Rep Power: 17
liugx212 is on a distinguished road
Hi, friend,

I have a trouble about the paraFoam module. I want to use paraFoam to view my result. But when I run paraFoam, I was told there are errors as follows:

ERROR: In ../../../../../paraview-2.2.0/GUI/Client/vtkPVXMLPackageParser.cxx, line 677
vtkPVXMLPackageParser (0x8cc8b10): Error loading Library component PVFoamReader

ErrorMessage end
/home/liu/OpenFOAM/OpenFOAM-1.2/bin/paraFoam: line 57: 10142 Segmentation fault paraview paraFoam.pvs

But when I went to position of the PVFoamReader and run Allwmake, I was told also errors as:

`/home/liu/OpenFOAM/OpenFOAM-1.2/lib/linuxGcc4Opt/libvtkFoam.so' is up to date.
./Allwmake: line 2: cmake: command not found
make: *** No targets specified and no makefile found. Stop.

So I really do not how to solve. Could you please help me?

Thanks.
liugx212 is offline   Reply With Quote

Old   February 3, 2006, 12:06
Default check this out: http://www.
  #2
Member
 
stefan
Join Date: Mar 2009
Posts: 96
Rep Power: 17
stefanke is on a distinguished road
check this out:

http://www.cfd-online.com/OpenFOAM_D...tml?1108676671
stefanke is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[OpenFOAM] Visualization problem on ParaFoam Rider ParaView 10 June 27, 2016 11:19
[blockMesh] Problem with arc edge, arc doesen't appear in ParaFoam A.A. OpenFOAM Meshing & Mesh Conversion 2 September 4, 2012 08:01
Problem with paraFoam Arenio OpenFOAM 0 April 12, 2011 06:41
Graphics problem in ParaFoam Tarak OpenFOAM 0 October 28, 2010 20:10
[blockMesh] Problem using paraFoam to view cavityGrade mesh file felik9 OpenFOAM Meshing & Mesh Conversion 1 September 27, 2009 16:31


All times are GMT -4. The time now is 07:32.