[OpenFOAM] ParaFoam instalation in OpenFoam 1.5 dev

titio · July 22, 2010, 15:42

Hi foamers,

Is it possible to install and use paraview/parafoam in OpenFoam 15.dev. I am trying to correct the script that comes with OpenFoam 1.5 dev, using as a base the script of OpenFoam 1.6, but it is costing me a lot.

Can anyone help out, or, is it easier to install openFoam 1.7 in the same account and change the environmemt variables in .bashrc whenever desirable.

Regards,

Titio

wyldckat · July 23, 2010, 06:34

Greetings Titio,

I have pretty much no experience with the -dev project, but as far as I can tell, it should be as simple as in the official OpenFOAM. You have to edit the file "OpenFOAM-1.5-dev/etc/apps/paraview3/bashrc" and tweak it to suit your needs and make it point to your installed ParaView!

Or you can leave that file intact and try to use the official ParaView version 3.8.0, which now comes with its own working foam reader, thankfully to Takuya's plugin

. I've posted on my blog on this forum on how to do this: Using the official pre-built ParaView 3.8.0 version with OpenFOAM...
Hopefully it will work with the -dev project as well!

Best regards,
Bruno

ericnutsch · July 24, 2010, 23:24

Sourcing 1.5 dev seems to disrupt the operational of paraview.

I source openfoam in a shell each time I run it (no in my user .bashrc file) and run foamToVTK. I then open up paraview from a different shell and locate the files manually, or use paraDisplay(my own little code snipit).

http://www.cfd-online.com/Forums/ope...-parafoam.html

Im in the process of getting paraDisplay to work with 1.5dev in the same shell. I will post it when I write it.

July 22, 2010, 15:42	ParaFoam instalation in OpenFoam 1.5 dev	#1
titio Senior Member Antonio Martins Join Date: Mar 2009 Location: Porto, Porto, Portugal Posts: 112 Rep Power: 17	Hi foamers, Is it possible to install and use paraview/parafoam in OpenFoam 15.dev. I am trying to correct the script that comes with OpenFoam 1.5 dev, using as a base the script of OpenFoam 1.6, but it is costing me a lot. Can anyone help out, or, is it easier to install openFoam 1.7 in the same account and change the environmemt variables in .bashrc whenever desirable. Regards, Titio

July 23, 2010, 06:34		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings Titio, I have pretty much no experience with the -dev project, but as far as I can tell, it should be as simple as in the official OpenFOAM. You have to edit the file "OpenFOAM-1.5-dev/etc/apps/paraview3/bashrc" and tweak it to suit your needs and make it point to your installed ParaView! Or you can leave that file intact and try to use the official ParaView version 3.8.0, which now comes with its own working foam reader, thankfully to Takuya's plugin . I've posted on my blog on this forum on how to do this: Using the official pre-built ParaView 3.8.0 version with OpenFOAM... Hopefully it will work with the -dev project as well! Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to contribute to the community of OpenFOAM users and to the OpenFOAM technology	wyldckat	OpenFOAM	17	November 10, 2017 15:54
OpenFOAM v3.0+ ??	SBusch	OpenFOAM	22	December 26, 2016 14:24
[OpenFOAM.org] Mac OS X 10.11 and OpenFOAM 3.0: Error when running ParaFoam with "command not found"	hua	OpenFOAM Installation	9	February 10, 2016 23:45
[General] Using Python in Openfoam in-built paraFoam (paraView 3.8.0)	Man Yue	ParaView	6	November 30, 2012 06:57
OpenFOAM Version 1.5 Released	OpenFOAM discussion board administrator	OpenFOAM Announcements from ESI-OpenCFD	0	July 14, 2008 18:22

July 24, 2010, 23:24		#3
ericnutsch Senior Member Eric Nutsch Join Date: Sep 2009 Location: Eugene, Oregon USA Posts: 113 Rep Power: 16	Sourcing 1.5 dev seems to disrupt the operational of paraview. I source openfoam in a shell each time I run it (no in my user .bashrc file) and run foamToVTK. I then open up paraview from a different shell and locate the files manually, or use paraDisplay(my own little code snipit). http://www.cfd-online.com/Forums/ope...-parafoam.html Im in the process of getting paraDisplay to work with 1.5dev in the same shell. I will post it when I write it.