Thanks Paul It works
King Regards |
Particle tracking in ParaView 4.1.0
Hello,
I was trying to use the procedure from 7islands for the particle tracking in ParaView 4.1.0, however some filter as ParticlePathlines or Pathlines are missing. I tried to use filter ParticlePath, however it does not work. Can somebody advise me how to track a particle (defined e.g. by point source) over simulation time in ParaView 4.1.0? I use interFoam solver. Atlan |
There is a tutorial on the wiki now
|
foamToVTK- nothing in scalar nor vector of lagrangian cloud
hi
i am using DPMFoam. i run 1. foamToVTK and then 2. open the kinematicCloud file and then 3. glyph. but i see nothing in Scalars and Vector. does any one know whats the problem!? i have all the properties of my lagrangian particles in all the times folder. and i can see them by parafoam. but i dont know whats the problem with the foamToVTk. should i do any thing any rather than the steps i mentioned? |
1 Attachment(s)
oh, srry
i found what was the problem. it seems i have to choose the files of lagrangian cloud for each separated time not the whole files all together! but can i have all the time steps in paraview after foamToVTK? the other question of mine is that how can i plot the curve for the surface of my particles ? Attachment 42464 |
how to use particle tracking and entering in paraview?
Dear All,
I am a new user in OpenFOAM and paraview and want to enter the particles in my case...But I do not know it and need it very much. Please tell me those steps of entering and tracking particles in paraview as simple! Thanks in advance! Ali |
Quote:
I was interested in the procedure that you attached to get particle tracking without performing it in the fluid solver, but just computing in Paraview. Unfortunately I can not open your attachment. Could you please send me the steps of the procedure? Thanks in advance for your help |
@Fred90ar: The answer to your request is already answered a few posts above:
Quote:
|
Quote:
The problem is that when I apply the ParticleTracer filter Paraview ( I tried both version (5.4.1, 5.5.2 and 4.4.0) stops immediatly without giving any description of the kind of error. As suggested in the previous steps, I performed a TemporalInterpolator filter but I noticed (trying several times) that gives different results with the same input parameters. For the ParticleTracer filter, I defined as input the volume mesh where are contained the velocity information and as source I selected the inlet plane of my CFD model. Did anyone experience the same problem with ParticleTracer? |
Was having same issue, but it worked later on
Quote:
|
All times are GMT -4. The time now is 08:59. |