CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Paraview & paraFoam

interpolation on a surface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 2, 2010, 10:16
Default interpolation on a surface
  #1
New Member
 
Michael Ehlen
Join Date: Nov 2010
Posts: 3
Rep Power: 6
m.ehlen is on a distinguished road
Hi,

I have calculated a field with Openfoam. Now I like to visualize the results on a surface which is not part of the OpenFOAM simulation. The surface is described as e.g. a stl file. I can't use the slice tool, because it's not a flat plane. In general I like to slice the domain with a given surface.
Can anyone help me?
m.ehlen is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with Gmsh nishant_hull Open Source Meshers: Gmsh, Netgen, CGNS, ... 23 August 5, 2015 02:09
Error : Self intersecting surface mesh, computing intersections & Error : Impossible velan Open Source Meshers: Gmsh, Netgen, CGNS, ... 1 July 14, 2015 05:54
boundaries with gmshToFoam‏ ouafa Open Source Meshers: Gmsh, Netgen, CGNS, ... 7 May 21, 2010 12:43
Surface interpolation schemes and parallelization jutta OpenFOAM Running, Solving & CFD 0 February 25, 2010 15:32
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19


All times are GMT -4. The time now is 17:18.