CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > ParaView

[OpenFOAM] Deformed mesh in ParaView from solidDisplacementFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree4Likes
  • 1 Post By Hisham
  • 3 Post By eysteinn

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 21, 2011, 12:21
Default Deformed mesh in ParaView from solidDisplacementFoam
  #1
Senior Member
 
Hisham's Avatar
 
Hisham Elsafti
Join Date: Apr 2011
Location: Braunschweig, Germany
Posts: 257
Blog Entries: 10
Rep Power: 16
Hisham is on a distinguished road
Dear Foamers,

Using the elastic FVM solver solidDisplacementFoam in OF v-2.0.0, is it possible to view the deformed (distorted) mesh in ParaView based on the calculated displacements?

Is there a filter for that? I have extensively searched the object inspector but no luck

Thanks
Hisham
alia likes this.
Hisham is offline   Reply With Quote

Old   September 9, 2011, 05:34
Default
  #2
Member
 
Eysteinn Helgason
Join Date: Sep 2009
Location: Gothenburg, Sweden
Posts: 53
Rep Power: 16
eysteinn is on a distinguished road
Hi Hisham

Try the warp filter and displacement vector as input.

/Eysteinn
supersoldier, alia and erich1016 like this.
eysteinn is offline   Reply With Quote

Old   September 9, 2011, 06:22
Default
  #3
Senior Member
 
Hisham's Avatar
 
Hisham Elsafti
Join Date: Apr 2011
Location: Braunschweig, Germany
Posts: 257
Blog Entries: 10
Rep Power: 16
Hisham is on a distinguished road
Hi Eyesteinn,

Thanks a lot .... It worked like a charm

Ever so grateful!

Thanks
Hisham
Hisham is offline   Reply With Quote

Reply

Tags
deformed mesh, paraview, soliddisplacementfoam, stress analysis

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
sliding mesh problem in CFX Saima CFX 46 September 11, 2021 08:38
[snappyHexMesh] Snappyhex mesh: poor inlet mesh Swagga5aur OpenFOAM Meshing & Mesh Conversion 1 December 3, 2016 17:59
[snappyHexMesh] SnappyHexMesh for internal Flow vishwa OpenFOAM Meshing & Mesh Conversion 24 June 27, 2016 09:54
[mesh manipulation] Importing Multiple Meshes thomasnwalshiii OpenFOAM Meshing & Mesh Conversion 18 December 19, 2015 19:57
[snappyHexMesh] SnappyHexMesh no layers and no decent mesh for complex geometry pizzaspinate OpenFOAM Meshing & Mesh Conversion 1 February 25, 2015 08:05


All times are GMT -4. The time now is 19:29.