CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Post-Processing

Streamlines for a RhoPimpleFoam Simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 4, 2012, 06:10
Default Streamlines for a RhoPimpleFoam Simulation
  #1
New Member
 
Praveen Srikanth
Join Date: Jul 2012
Location: West Lafayette, IN
Posts: 14
Rep Power: 5
praveensrikanth91 is on a distinguished road
I am trying to simulate the rarefied gas flow through a microchannel using rhoPimpleFoam over a pressure gradient. I ran the simulation for the conditions as mentioned in the working case directory attached and got the velocity and pressure plots. However I am unable to use any of the filters such as plot over line or stream tracer to visualize the results further. As I am new to OpenFoam I am not sure as to how to proceed. Please help me out..

The working directory can be downloaded from here
https://www.dropbox.com/s/lsmwwjjulzbbuki/Run_4.tar.gz

Many Thanks

Praveen
praveensrikanth91 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Solar Radiation in OpenFOAM plainstyle OpenFOAM Running, Solving & CFD 15 July 8, 2014 04:43
Simulation of a complex wing in solidworks flow simulation niels1900 FloEFD, FloWorks & FloTHERM 6 April 20, 2011 10:44
GUI crash and simulation engine still running RPJones FLOW-3D 2 November 9, 2010 09:18
Continuous vs interrupted simulation sega OpenFOAM Running, Solving & CFD 4 November 3, 2008 15:29
strange simulation error Ralf Schmidt FLUENT 2 May 4, 2007 13:02


All times are GMT -4. The time now is 00:08.