CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Post-Processing

isoline on a sample surface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 10, 2013, 04:30
Default isoline on a sample surface
  #1
Senior Member
 
Elo´se
Join Date: Jul 2012
Location: Trondheim, Norway
Posts: 103
Rep Power: 5
Eloise is on a distinguished road
Hello,

I have made a 3D simulation which is too large to be post-processed by importing the full domain in ParaView. Therefore, I used the sample utility to extract some cutting planes in vtk format.
In ParaView, I would like to plot isolines on the cutting plane but the Contour filter is not available for 2D dataset. Does anyone has an idea how to get them?

Regards,
Elo´se
Eloise is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error : Self intersecting surface mesh, computing intersections & Error : Impossible velan Open Source Meshers: Gmsh, Netgen, CGNS, ... 1 July 14, 2015 05:54
Layers don't fully surround surface EVBUCF OpenFOAM Native Meshers: snappyHexMesh and Others 14 August 20, 2012 04:31
boundaries with gmshToFoam‏ ouafa Open Source Meshers: Gmsh, Netgen, CGNS, ... 7 May 21, 2010 12:43
Patran Volume Meshing Deb CFX 19 April 17, 2003 10:56
free convection heat transfer from a heated horizontal surface through a liquid to a thin cooled fin Kaushik FLUENT 1 May 8, 2000 06:47


All times are GMT -4. The time now is 02:16.