CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Post-Processing

Paraview problems with coded BCs

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 5, 2013, 07:40
Default Paraview problems with coded BCs
  #1
Senior Member
 
Hisham's Avatar
 
Hisham El Safti
Join Date: Apr 2011
Location: Braunschweig, Germany
Posts: 247
Blog Entries: 10
Rep Power: 8
Hisham is on a distinguished road
Dear Foamers,

When using either codedFixed or codedMixed BCs, when I try to visualize the results by paraview the field with the BC is not loaded. However, the field views fine under paraFoam. A lot of errors are generated pointing to the code!

What am I missing? Is there a workaround?

Best regards,
Hisham
Hisham is offline   Reply With Quote

Reply

Tags
codedfixed, codedmixed, parafoam, paraview

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems with BCs in muliphase flow with water falling from a reservoir Paul_l FLUENT 2 March 11, 2011 05:59
Problems opening .vtu in ParaView Bartek ParaView 0 January 17, 2010 07:21
Installation problems about Paraview and PV3foamreader clark_liang OpenFOAM Installation 1 January 12, 2009 07:05
Problems with paraView alejo OpenFOAM Pre-Processing 0 February 17, 2006 08:24
Problems with Paraview evgenii OpenFOAM Paraview & paraFoam 2 November 23, 2005 08:35


All times are GMT -4. The time now is 06:10.