CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Post-Processing (http://www.cfd-online.com/Forums/openfoam-post-processing/)
-   -   RANS Reynold Stress Postprocessing (http://www.cfd-online.com/Forums/openfoam-post-processing/118995-rans-reynold-stress-postprocessing.html)

mosquera June 7, 2013 17:19

RANS Reynold Stress Postprocessing
 
I'm working on a case in which I have the results of a RANS simulation. The simulation was solved using simpleFoam.

To do more simulations, I need the reynolds stress tensor throughout the mesh. I've tried using the R post-processing tool but receive an error

'"--> FOAM FATAL ERROR:
Unknown patchField type kLowReWallFunction

Valid patchField types are :..."

How can I either fix this error in the R post-processor tool or my code? I'd rather not go through the mesh and remove the boundary conditions if it could be helped.

Thanks,
Matt

nimasam June 8, 2013 08:45

you yourself point to one solution to remove or replace kLowReWallFunction with a known BC at time directories
another solution maybe can be to upgrade your OpenFOAM version, sometimes it solves similar problems


All times are GMT -4. The time now is 08:27.