# How reconstruct pressure on a boundary in parallel run ?

 Register Blogs Members List Search Today's Posts Mark Forums Read

 July 21, 2013, 09:39 How reconstruct pressure on a boundary in parallel run (during Run) ? #1 Senior Member   Join Date: Jun 2011 Posts: 151 Rep Power: 7 Is it possible to reconstruct pressure or velocity on a boundary in a parallel run and obtain the pressure on that boundary (during run not for post processing) for example: if during a run the pressure at processor N is shown by PN and they are as follow how we can reconstruct them P0= 20 ( -55.8428 -57.6691 -61.1336 -65.5385 -70.2184 -74.7188 -78.6798 -81.829 -83.9898 -85.0677 123.47 125.28 128.745 133.15 137.831 142.333 146.297 149.452 151.617 152.696 ) P1= 25 ( -85.0475 -83.8217 -81.4402 -77.9027 -73.199 -67.2925 -60.0901 -51.3958 -40.7595 -28.5443 13.0599 23.4403 33.5093 43.5004 53.6818 152.681 151.464 149.081 145.536 140.815 134.877 127.62 118.849 108.006 95.2818 ) P2=0() P3=0() Last edited by mechy; July 22, 2013 at 06:39.

 April 30, 2015, 03:49 #2 Senior Member   MultiComb Join Date: May 2014 Posts: 198 Rep Power: 4 Dear mechy, Had you solved you problem? Regards, Wen Xu

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post HMR CFX 5 October 10, 2016 05:57 Mavier CFX 5 April 29, 2013 00:00 mehrdadeng CFX 10 February 25, 2011 06:25 xujjun CFX 9 June 9, 2009 07:59 Chris CD-adapco 2 June 21, 2005 08:20

All times are GMT -4. The time now is 11:47.