CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Post-Processing

Mass flux of the particles at a specific plane

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 28, 2016, 10:04
Default Mass flux of the particles at a specific plane
  #1
New Member
 
Setareh
Join Date: Feb 2015
Posts: 1
Rep Power: 0
Setareh.eb is on a distinguished road
Hi all,
I am using OpenFOAM 2.2.x for simulation of water sprays (the Lagrangian approach). I need to calculate the mass flux (kg/s.m2) of the particles at specific planes at different heights from the nozzle. I believe itís nothing that can be simply done in ParaView and I would need to make some changes in the source code but Iím not sure how to do it!
I would be thankful if anyone can help me regarding this problem.


Many thanks in advance!
Setareh.eb is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Incident mass flux of non-walls HenrikBH STAR-CCM+ 0 November 28, 2014 16:39
Problem setting with chtmultiregionFoam Antonin OpenFOAM 10 April 24, 2012 09:50
How to plot a diagram shows the mass flux of the particles vs the partical diameter? sosososo1114 STAR-CCM+ 1 March 22, 2011 08:48
Two-Phase Buoyant Flow Issue Miguel Baritto CFX 4 August 31, 2006 12:02
Definition of Mass flux F1 Gavin CD-adapco 1 April 17, 2006 17:51


All times are GMT -4. The time now is 21:22.