FoamDatatoFluent BC

achuneka · August 13, 2008, 14:15

I have a problem in reading the file created by foamDatatoFluent.

Fluent does not read the boundary conditions from the file converted through foamDataToFluent.

Instead it uses the internal field values. For instance, the velocity at no slip walls is equal to the the flow velocity.

I checked the .dat file and it did have the boundary values (e.g inlet velocity) although could not find the boundary labels.

Please help.

fra76 · August 15, 2008, 03:43

In a Fluent case, the boundary conditions are written in the .cas file, while the .dat contains only runtime value.
Hope this helps.

Francesco

achuneka · August 15, 2008, 09:21

Thanks.

In that case the foamDataToFluent creates only a .dat file. So how can I view the OpenFOAM results in Fluent ?

fra76 · August 16, 2008, 05:10

foamMeshToFluent -> creates .msh file (note, -msh, means no BC defined)
foamDataToFluent -> creates .dat file

Open both in Fluent and you'll be able to see the solution.

Francesco

achuneka · August 16, 2008, 11:21

Thanks Francesco...
But I am doing exactly that and I do see the interior domain. But whenever I check out the values on the boundaries they are the same as that on interior.

Has anyone faced a similar problem ?

August 13, 2008, 14:15	I have a problem in reading th	#1
achuneka New Member Aditya Chunekar Join Date: Mar 2009 Posts: 18 Rep Power: 17	I have a problem in reading the file created by foamDatatoFluent. Fluent does not read the boundary conditions from the file converted through foamDataToFluent. Instead it uses the internal field values. For instance, the velocity at no slip walls is equal to the the flow velocity. I checked the .dat file and it did have the boundary values (e.g inlet velocity) although could not find the boundary labels. Please help.

August 15, 2008, 03:43	In a Fluent case, the boundary	#2
fra76 Senior Member Francesco Del Citto Join Date: Mar 2009 Location: Zürich Area, Switzerland Posts: 237 Rep Power: 18	In a Fluent case, the boundary conditions are written in the .cas file, while the .dat contains only runtime value. Hope this helps. Francesco

August 15, 2008, 09:21	Thanks. In that case the fo	#3
achuneka New Member Aditya Chunekar Join Date: Mar 2009 Posts: 18 Rep Power: 17	Thanks. In that case the foamDataToFluent creates only a .dat file. So how can I view the OpenFOAM results in Fluent ?

August 16, 2008, 05:10	foamMeshToFluent -> creates .m	#4
fra76 Senior Member Francesco Del Citto Join Date: Mar 2009 Location: Zürich Area, Switzerland Posts: 237 Rep Power: 18	foamMeshToFluent -> creates .msh file (note, -msh, means no BC defined) foamDataToFluent -> creates .dat file Open both in Fluent and you'll be able to see the solution. Francesco

August 16, 2008, 11:21	Thanks Francesco... But I am	#5
achuneka New Member Aditya Chunekar Join Date: Mar 2009 Posts: 18 Rep Power: 17	Thanks Francesco... But I am doing exactly that and I do see the interior domain. But whenever I check out the values on the boundaries they are the same as that on interior. Has anyone faced a similar problem ?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FoamDataToFluent	maritozzo	OpenFOAM Post-Processing	34	December 14, 2020 12:33
FoamDataToFluent	dnomdec	OpenFOAM Post-Processing	8	July 31, 2013 11:07
Error whit foamDataToFluent	matteo_gautero	OpenFOAM	1	November 12, 2012 04:46
Velocity Components in foamDataToFluent	flavio_pergolesi	OpenFOAM Post-Processing	1	November 9, 2009 09:27
FoamDataToFluent Problem	aganesan	OpenFOAM Post-Processing	8	June 4, 2008 17:15