CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Post-Processing (http://www.cfd-online.com/Forums/openfoam-post-processing/)
-   -   SampleSurface with moving plane (http://www.cfd-online.com/Forums/openfoam-post-processing/61370-samplesurface-moving-plane.html)

lr103476 August 21, 2008 11:48

Hi Everybody, I just disco
 
Hi Everybody,

I just discovered the use of sampleSurface on a moving wall, for example a 3D wing. All moving coordinates and pressure are written to one file.

Right now, I am trying to do the following: Write the pressure on the moving wall AT certain planes....So is there a way to use patches AND planes in this sampleSurface utility?

In such a way we can plot i.e. Cp along the chord at different spanwise locations.

Thanks, Frank

mattijs August 21, 2008 16:08

There is nothing in sampleSurf
 
There is nothing in sampleSurface. Guess you'll have to do the re-sampling in paraview.

TengWU April 19, 2013 11:42

Quote:

Originally Posted by lr103476 (Post 187187)
Hi Everybody,

I just discovered the use of sampleSurface on a moving wall, for example a 3D wing. All moving coordinates and pressure are written to one file.

Right now, I am trying to do the following: Write the pressure on the moving wall AT certain planes....So is there a way to use patches AND planes in this sampleSurface utility?

In such a way we can plot i.e. Cp along the chord at different spanwise locations.

Thanks, Frank

Hi Frank Bos,

I'm wondering whether you have find the solution on this issue? Recently I'm also struggling with the same issue but cannot get a good solution!

Thanks,
Teng Wu


All times are GMT -4. The time now is 20:13.