CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Post-Processing

SampleSurface with moving plane

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 21, 2008, 11:48
Default Hi Everybody, I just disco
  #1
Senior Member
 
Frank Bos
Join Date: Mar 2009
Location: The Netherlands
Posts: 338
Rep Power: 9
lr103476 is on a distinguished road
Hi Everybody,

I just discovered the use of sampleSurface on a moving wall, for example a 3D wing. All moving coordinates and pressure are written to one file.

Right now, I am trying to do the following: Write the pressure on the moving wall AT certain planes....So is there a way to use patches AND planes in this sampleSurface utility?

In such a way we can plot i.e. Cp along the chord at different spanwise locations.

Thanks, Frank
__________________
Frank Bos
lr103476 is offline   Reply With Quote

Old   August 21, 2008, 16:08
Default There is nothing in sampleSurf
  #2
Super Moderator
 
Mattijs Janssens
Join Date: Mar 2009
Posts: 1,416
Rep Power: 16
mattijs is on a distinguished road
There is nothing in sampleSurface. Guess you'll have to do the re-sampling in paraview.
mattijs is offline   Reply With Quote

Old   April 19, 2013, 11:42
Default
  #3
New Member
 
Teng Wu
Join Date: Feb 2012
Posts: 9
Rep Power: 5
TengWU is on a distinguished road
Quote:
Originally Posted by lr103476 View Post
Hi Everybody,

I just discovered the use of sampleSurface on a moving wall, for example a 3D wing. All moving coordinates and pressure are written to one file.

Right now, I am trying to do the following: Write the pressure on the moving wall AT certain planes....So is there a way to use patches AND planes in this sampleSurface utility?

In such a way we can plot i.e. Cp along the chord at different spanwise locations.

Thanks, Frank
Hi Frank Bos,

I'm wondering whether you have find the solution on this issue? Recently I'm also struggling with the same issue but cannot get a good solution!

Thanks,
Teng Wu
TengWU is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SampleSurface problem saf5029 OpenFOAM Post-Processing 2 June 13, 2008 14:42
Gmsh and samplesurface touf Open Source Meshers: Gmsh, Netgen, CGNS, ... 2 December 10, 2007 03:27
SurfaceWriters other than raw are not selectable in sampleSurface hannes OpenFOAM Bugs 4 August 28, 2007 09:04
Question about sampleSurface osimonsimon OpenFOAM Paraview & paraFoam 0 October 16, 2006 22:32
Zero values using sampleSurface steja OpenFOAM Paraview & paraFoam 2 June 15, 2006 04:23


All times are GMT -4. The time now is 16:53.