CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Post-Processing

How to visualize sets in constantpolyMeshsets

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 30, 2008, 22:25
Default Hi, I did a checkMesh . cas
  #1
Senior Member
 
Pei-Ying Hsieh
Join Date: Mar 2009
Posts: 317
Rep Power: 9
hsieh is on a distinguished road
Hi,

I did a checkMesh . case. checkMesh found some some faces with concave angles and put them in constant/polyMesh/sets/concaveFaces. How can I visualize these faces? Is it possible to improve these faces? and how?

Thanks!

pei
hsieh is offline   Reply With Quote

Old   January 31, 2008, 02:41
Default Hi Pei, Just to visualize is
  #2
Senior Member
 
dmoroian's Avatar
 
Dragos
Join Date: Mar 2009
Posts: 647
Rep Power: 11
dmoroian is on a distinguished road
Hi Pei,
Just to visualize is simple: use foamToVTK to convert the set to vtk format
foamToVTK ./ case_name -constant -faceSet concaveFaces
and then use paraview to actually see them.

Dragos
dmoroian is offline   Reply With Quote

Old   February 1, 2008, 19:19
Default Thanks Dragos! Pei
  #3
Senior Member
 
Pei-Ying Hsieh
Join Date: Mar 2009
Posts: 317
Rep Power: 9
hsieh is on a distinguished road
Thanks Dragos!

Pei
hsieh is offline   Reply With Quote

Old   February 6, 2008, 08:59
Default Hi, In my case there are face
  #4
Member
 
Paul Mauk
Join Date: Mar 2009
Posts: 39
Rep Power: 8
plmauk is on a distinguished road
Hi,
In my case there are faceZones and cellZones too.
I run foamToVTK, and now I can see faceZones in paraView. But cellZones are unvisible. Why?

thanks,
Paul
plmauk is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
DecomposePar and sets jhierroa Open Source Meshers: Gmsh, Netgen, CGNS, ... 7 January 25, 2008 10:48
DecomposePar and sets jhierroa Open Source Meshers: Gmsh, Netgen, CGNS, ... 0 January 2, 2007 22:32
DecomposePar and sets jhierroa Open Source Meshers: Gmsh, Netgen, CGNS, ... 0 January 2, 2007 22:30
Two sets of periodic boundary. David FLUENT 1 November 16, 2006 21:21
need sample post CFD data sets Joe Conti Main CFD Forum 0 April 17, 2000 15:38


All times are GMT -4. The time now is 01:07.